EE-SX473
Omron Cảm biến quang siêu nhỏ
Connector
| Appearance | Sensing method | Connecting method | Sensing distance | Output configuration | Indicator mode | Model | ||
|---|---|---|---|---|---|---|---|---|
| NPN output | PNP output | |||||||
| Standard |  | Through- beam type (with slot) | Connector (4 poles) | 5 mm (slot width) (Infrared light) | Dark-ON/ Light-ON (selectable) *3 *4 | Incident light | EE-SX670 | EE-SX670P |
| No incident light | EE-SX670A | EE-SX670R | ||||||
| Light-ON | Incident light | EE-SX470 | — | |||||
| L-shaped |  | Dark-ON/ Light-ON (selectable) *3 *4 | Incident light | EE-SX671 | EE-SX671P | |||
| No incident light | EE-SX671A | EE-SX671R | ||||||
| Light-ON | Incident light | EE-SX471 | — | |||||
| T-shaped, slot center 7 mm |  | Dark-ON/ Light-ON (selectable) *3 *4 | Incident light | EE-SX672 | EE-SX672P | |||
| No incident light | EE-SX672A | EE-SX672R | ||||||
| Light-ON | Incident light | EE-SX472 | — | |||||
| Close- mounting |  | Dark-ON/ Light-ON (selectable) *3 *4 | Incident light | EE-SX673 | EE-SX673P | |||
| No incident light | EE-SX673A | EE-SX673R | ||||||
| Light-ON | Incident light | EE-SX473 | — | |||||
| Close- mounting |  | Dark-ON/ Light-ON (selectable) *3 *4 | Incident light | EE-SX674 | EE-SX674P | |||
| No incident light | EE-SX674A | EE-SX674R | ||||||
| Light-ON | Incident light | EE-SX474 | — | |||||
| T-shaped, slot center 10 mm |  | Dark-ON/ Light-ON (selectable) *3 *4 | Incident light | EE-SX675 | EE-SX675P | |||
| F-shaped |  | Dark-ON/ Light-ON (selectable) *3 *4 | Incident light | EE-SX676 | EE-SX676P | |||
| R-shaped |  | Dark-ON/ Light-ON (selectable) *3 *4 | Incident light | EE-SX677 | EE-SX677P | |||
*3. Dark-ON when the L terminal of the connector is opened, and light-ON when the L terminal and positive (+) terminal are connected. Do not connect the L terminal to 0 V when using dark-ON operation. When using light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are connected in advance.
*4. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from coming in contact with other terminals.
Reviews
There are no reviews yet.