H3CA-8H
Rơ le thời gian hiển thị số Omron
DIN-sized (48 × 48, 45 × 75 mm) Timer with Digital Setting and LCD Display
• Dual power supplies for free AC/DC.
• Eight operation modes selectable with one unit.
• Any desired time can be set digitally within a range from 0.1 seconds to 9,990 hrs.
• Four external signal inputs.
• ON/OFF indicator for control output and bar indicator for remaining time.
• Conforms to UL, CSA, and CE marking.
last update: May 8, 2018
| Operation/ resetting system |
Operation mode |
Terminal | Time- limit contact |
Instan- taneous contact |
Mounting | |
|---|---|---|---|---|---|---|
| Surface mounting/ track mounting |
Flush mounting |
|||||
| Time-limit operation/ self-resetting/external resetting *2 |
8 operation modes (selectable) *3 |
11-pin round socket |
SPDT | — | H3CA-A | H3CA-A |
| Front screw | H3CA-FA | — | ||||
| Time-limit operation/ self-resetting |
ON-delay operation | 8-pin round socket |
DPDT | — | H3CA-8 | H3CA-8 |
| SPDT | SPDT | H3CA-8H | H3CA-8H | |||
*1. Specify both the model number and supply voltage when ordering for the H3CA-8H and H3CA-8.
*2. The operation/resetting system depends on the selected operation mode. For details, see “Timing Chart”.
*3. The 8 operation modes are as follows:
A: ON-delay operation
B: Repeat cycle operation
C: Signal ON/OFF-delay operation (1)
D: Signal OFF-delay operation (1)
E: Interval operation
F: One-shot and flicker operation
G: Signal ON/OFF-delay operation (2)
H: Signal OFF-delay operation (2)
*2. The operation/resetting system depends on the selected operation mode. For details, see “Timing Chart”.
*3. The 8 operation modes are as follows:
A: ON-delay operation
B: Repeat cycle operation
C: Signal ON/OFF-delay operation (1)
D: Signal OFF-delay operation (1)
E: Interval operation
F: One-shot and flicker operation
G: Signal ON/OFF-delay operation (2)
H: Signal OFF-delay operation (2)
Accessories (Order Separately)
| Name/specifications | Model |
|---|---|
| Flush mounting adapter | Y92F-30 |
| Y92F-70 | |
| Y92F-71 | |
| Front cover | Y92A-48B |
| Y92A-48D | |
| Front connecting socket | P2CF-08 |
| P2CF-11 | |
| Front connecting socket Finger protection *1 |
P2CF-08-E |
| P2CF-11-E | |
| Back connecting socket | P3G-08 |
| P3GA-11 | |
| Back connecting socket Solder terminal |
PL08 |
| PL11 | |
| Terminal block cover for P3G-08/P3GA-11 *2 | Y92A-48G |
*1. Round crimp terminals cannot be used with fingerprotection structure sockets. Use forked crimp terminals.
*2. A terminal cover (Y92A-48G) can be used with P3GA-11 and P3G-08 for finger protection.
Reviews
There are no reviews yet.