FX2N-5A mô đun mở rộng 4AI/1AO

FX2N-5A

Mô đun mở rộng 4AI/1AO

By using analog input blocks and output blocks, analog quanties (voltage, current, etc.) can be input or output.
Analog control, which is indispensable in FA control, can be easily realized with PLC.

Analog expansion board (A/D conversion, D/A conversion)

Model (Number of channels)	Input specifications			Applicable FX PLC
	Item	Input voltage	Input current	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
FX3G-2AD-BD (Input 2 ch)	Input range	0 to 10 V DC (Input resistance 198.7 kΩ)	4 to 20 mA DC (Input resistance 250 Ω)	*3 ○ Max. 1 unit	*1*2 ○ Max. 2 units	×	×	×
	Resolution	2.5 mV (10 V/4000)	8 μA {(20 – 4 mA)/2000}
FX3G-1DA-BD (Output 1 ch)	Output range	0 to 10 V DC (External load resistance value 2 kΩ to 1 MΩ)	4 to 20 mA DC (External load resistance value 500 Ω or less)	*3 ○ Max. 1 unit	*1*2 ○ Max. 2 units	×	×	×
	Resolution	2.5 mV (10 V/4000)	8 μA {(20 – 4 mA)/2000}

*1: Supported by FX3G ver. 1.10 and later.
*2: FX3G 14pt, 24pt models: 1 board. 40pt, 60pt models: 2 boards.
*3: Function expansion board and FX3S-CNV-ADP cannot be used together.

Mixed Analog Input/Output (A/D conversion, D/A conversion)

Model (Number of channels)	Input/output specifications			Applicable FX PLC
	Item	Input/output voltage	Input/output current	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
FX3U-3A-ADP (Input 2 ch) (Output 1ch)	Input range	0 to 10 V DC (Input resistance 198.7 kΩ)	4 to 20 mA DC (Input resistance 250 Ω)	*7 ○ Max. 1 unit	*1*6 ○ Max. 2 units	*2 ○ Max. 4 units	○ Max. 2 units	*3 ○ Max. 4 units
	Output range	0 to 10 V DC (External load resistance value 5 kΩ to 1 MΩ)	4 to 20 mA DC (External load resistance value 500 Ω or less)
	Resolution	[Input voltage] 2.5 mV (10 V/4000) [Output voltage] 2.5 mV (10 V/4000)	[Input current] 5 μA (16 mA/3200) [Onput current] 4 μA (16 mA/4000)
FX2N-5A (Input 4 ch) (Output 1ch)	Input range	-100 to 100 mV DC -10 to 10 V DC (Input resistance 200 kΩ)	-20 to 20 mA DC 4 to 20 mA DC (Input resistance 250 Ω)	×	×	○ Max. 8 units	×	*4*5 ○ Max. 8 units
	Output range	-10 to 10 V DC (External load resistance value 2 kΩ to 1 MΩ)	0 to 20 mA DC, 4 to 20 mA DC (External load resistance value 500 Ω or less)
	Resolution	50 μV (at ±100 mV) 312.5 μV (at ±10 V)	1.25 μA，10 μA ((depending on mode used))

*1: Supported by FX3G ver.1.20 and later. For connection to FX3G, FX3G-CNV-ADP is required.
*2: Supported by FX3U ver.2.61 and later. For connection to FX3U, function expansion board is required.
*3: Supported by FX3UC ver.2.61 and later. When connecting to FX3UC-32MT-LT(-2), function expansion board is required.
*4: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*5: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 units.
*6: FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
*7: For connection to FX3S, FX3S-CNV-ADP is required.

Analog Input (A/D conversion)

Model (Number of channels)	Input specifications			Applicable FX PLC
	Item	Input voltage	Input current	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
FX3S-30MR/ES-2AD FX3S-30MT/ES-2AD FX3S-30MT/ESS-2AD (Input 2ch)	Input range	0 to 10 V DC (Input resistance 115.7 kΩ)	–	–	–	–	–	–
	Resolution	10 mV (10 V/1000)	–
FX2N-2AD (Input 2 ch)	Input range	0 to 10 V DC, 0 to 5 V DC (Input resistance 200 kΩ) The input characteristic is the same for each channel.	4 to 20 mA DC (Input resistance 250 Ω) The input characteristic is the same for each channel.	×	×	○ Max. 8 units	×	*1*2 ○ Max. 8 units
	Resolution	2.5 mV (10 V × 1/4000) 1.25 mV (5 V × 1/4000)	4 μA ((20 – 4 mA) × 1/4000)
FX3U-4AD (Input 4ch)	Input range	-10 to 10 V DC (Input resistance 200 kΩ)	-20 to 20 mA DC, 4 to 20 mA (Input resistance 250 Ω)	×	×	○ Max. 8 units	×	*1*2 ○ Max. 8 units
	Resolution	0.32 mV (20 V × 1/64000)	1.25 μA (40 mA × 1/32000)
FX3U-4AD-ADP (Input 4ch)	Input range	0 to 10 V DC (Input resistance 194 kΩ)	4 to 20 mA DC (Input resistance 250 Ω)	*8 ○ Max. 1 unit	*4*3 ○ Max. 2 units	*5 ○ Max. 4 units	○ Max. 2 units	*5*6 ○ Max. 4 units
	Resolution	2.5 mV (10 V/4000)	10 μA (16 mA/1600)
FX3UC-4AD (Input 4ch)	Input range	-10 to 10 V DC (Input resistance 200 kΩ)	4 to 20 mA DC, -20 to 20 mA DC (Input resistance 250 Ω)	×	×	×	×	*7*2 ○ Max. 8 units
	Resolution	0.32 mV (20 V × 1/64000) 2.50 mV (20 V × 1/8000)	1.25 μA (40 mA × 1/32000) 5.0 μA (40 mA × 1/8000)
FX2N-8AD (Input 8 ch)	Input range	-10 to 10 V DC (Input resistance 200 kΩ)	4 to 20 mA DC -20 to 20 mA DC (Input resistance 250 Ω)	×	×	○ Max. 8 units	×	*1*2 ○ Max. 8 units
	Resolution	0.63 mV (20 V × 1/32000) 2.50 mV (20 V × 1/8000)	2.5 μA (40 mA × 1/16000) 2 μA (16 mA × 1/8000) 5.0 μA (40 mA × 1/8000) 4 μA (16 mA × 1/4000)

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 units.
*3: FX3G 14pt, 24pt models: 1 board. 40pt, 60pt models: 2 boards.
*4: When connecting to FX3G, FX3G-CNV-ADP is required.
*5: When connecting to FX3U, function expansion board is required.
*6: FX3UC-32MT-LT supported from version 1.20 or later.
*7: FX3UC-32MT-LT supported from version 1.30 or later.
*8: When connecting to FX3S, FX3S-CNV-ADP is required.

Analog Output (D/A conversion)

Model (Number of channels)	Output specifications			Applicable FX PLC
	Item	Output voltage	Output current	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
FX2N-2DA (Output 2 ch)	Output range	0 to 10 V DC, 0 to 5 V DC (External load resistance value 2 kΩ to 1 MΩ)	4 to 20 mA DC (External load resistance value 400 Ω or less)	×	×	○ Max. 8 units	×	*1*2 ○ Max. 8 units
	Resolution	2.5 mV (10 V × 1/4000) 1.25 mV (5 V × 1/4000)	4 μA ((20 – 4) mA × 1/4000)
FX3U-4DA (Output 4 ch)	Output range	-10 to 10 V DC (External load resistance value 1 kΩ to 1 MΩ)	0 to 20 mA DC 4 to 20 mA DC (External load resistance value 500 Ωor less)	×	×	○ Max. 8 units	×	*1*2 ○ Max. 8 units
	Resolution	0.32 mV (20 V × 1/64000)	0.63 μA (20 mA × 1/32000)
FX3U-4DA-ADP (Output 4 ch)	Output range	0 to 10 V DC (External load resistance value 5 kΩ to 1 MΩ)	4 to 20 mA DC (External load resistance value 500 Ω or less)	*7 ○ Max. 1 unit	*3*4 ○ Max. 2 units	*5 ○ Max. 4 units	○ Max. 2 units	*5*6 ○ Max. 4 units
	Resolution	2.5 mV (10 V/4000)	4 μA (16 mA/4000)

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 units.
*3: FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
*4: When connecting to FX3G, FX3G-CNV-ADP is required.
*5: When connecting to FX3U, FX3UC-32MT-LT(-2), function expansion board is required.
*6: FX3UC-32MT-LT supported from version 1.20 or later.
*7: When connecting to FX3S, FX3S-CNV-ADP is required.