Cảm biến quang siêu nhỏ EE-SPX613 1M


Giao hàng COD toàn quốc

Mô Tả Sản Phẩm

EE-SPX613 1M

Liquid Level Photomicrosensor with operation mode and sensitivity selectors for easy application

Thông số kĩ thuật

ensing method Through-beam type
Operation mode Dark-ON/Light-ON (selectable)
Applicable pipe Any 6 to 13 mm diameter pipe with a wall thickness of 1 mm that is made of FEP or any other material as transparent as FEP.
Standard sensing object Liquids in pipes
(High-viscosity liquids or liquids with floating materials may not be detected)
Light source (Peak wavelength) GaAs infrared LED (940 nm)
Indicator Light indicator GaP (Red LED: Peak wavelength of 700 nm)
Power supply voltage 12 to 24 VDC ±10% (ripple (p-p)5% max.)
Current consumption Average: 30 mA max./Peak: 80 mA max.
Control output (Output type) NPN Open collector output
Control output (Load power supply voltage) 5 to 24 VDC
Control output (Load current) 100 mA max.
Control output (Residual voltage) 0.8 V max. (at 100 mA load current)
0.4 V max. (at 40 mA load current)
Illumination on the surface receiver Incandescent light, sunlight: 3000 lx max.
Ambient temperature Operating: -10 to 55 ℃
Storage: -25 to 65 ℃
(with no icing or condensation)
Ambient humidity Operating: 5 to 85% RH
Storage: 5 to 95% RH
(with no icing or condensation)
Vibration resistance 10 to 500 Hz, 1.0-mm single amplitude or acceleration 150 m/s**2, 3 times each in X, Y, and Z directions (11 min/sweeps)
Shock resistance 500 m/s**2, 3 times each in X, Y, and Z directions
Degree of protection (IEC60529) IP50
Connection method Pre-wired models
Cable length 1 m
Material Case: Polycarbonate(PC)
Cover: Polycarbonate(PC)
Accessories Support belt
slip protection tube
Instruction manual


There are no reviews yet.

Be the first to review “Cảm biến quang siêu nhỏ EE-SPX613 1M”

Your email address will not be published. Required fields are marked *