E5AC-QX3ASM-800

Bộ điều khiển nhiệt E5AC, kích thước 96 x 96mm, ngõ ra SSR (12VDC)

Nguồn cấp: 100 to 240 VAC, 50/60 Hz (85% – 110% điện áp định mức)
Hiển thị:

PV hiển thị màu trắng dễ đọc.

Hiển thị 3 dòng: PV/SV/MV, PV/SV/Multi-SP, or PV/SV/Remaining soak time
Chiều cao: PV: 25.0 mm, SV: 15.0 mm, MV: 9.5 mm
Hiển thị 4 số cho PV, SV, và MV

Ngõ vào:

– Thermocouple: K, J, T, E, L, U, N, R, S, B, W, PL II
– Platinum resistance thermometer: Pt100, JPt100
– Infrared temperature sensor: 10 ~ 70°C, 60 ~ 120°C, 115 ~ 165°C, 140 ~ 260°C
– Current input: 4 ~ 20 mA hoặc 0 ~ 20 mA
– Voltage input: 1 ~ 5 V, 0 ~ 5 V, 0 ~ 10 V

Tốc độ lấy mẫu ngõ vào: 50 ms
Ngõ ra điều khiển 1: Rơ-le
Ngõ ra điều khiển 2: Không
Ngõ ra alarm: 3 ngõ ra NO, 2A ở 250VAC (tải thuần trở)
Ngõ ra Transfer: Không
Chức năng điều khiển: ON/OFF control hoặc 2-PID control (with auto-tuning)
Chức năng khác: Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout (HB) alarm (including SSR failure (HS) alarm), 40% AT, 100% AT, MV limiter, input digital filter, self tuning, robust tuning, PV input shift, run/stop, protection functions, extraction of square root, MV change rate limit, simple calculations, temperature status display, simple programming, moving average of input value, and display brightness setting.
Nhiệt độ làm việc: -10 ~ 55°C (with no condensation or icing)
Tiêu chuẩn: UL 61010-1, CSA C22.2 No. 611010-1 (evaluated by UL); EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II

>> Tải ngay tài liệu và ứng dụng E5AC-QX3ASM-800 để tra cứu chi tiết

Đặc điểm sản phẩm

he New E5CC, E5CC-U, E5EC, E5AC, and E5DC Next-generation Digital Controllers with Advanced Designs and Easy Operation

White PV display and new LCD with greatly improved visibility.*
* 100 times higher contrast ratio than the E5[]Z.

A compact body with large display characters for easy reading even from a distance.
This helps to reduce human error.

The white LCD display is easy to read in the subdued lighting conditions.

The display remains easy to read even from wide viewing angles.

Save space!

The compact and space-saving design of the new E5CC/E5EC/E5AC controller generation requires less space behind the panel (60 mm), allowing quick snap-mounting and easy installation even under very cramped conditions.*
* Excluding E5CC-U and E5DC

Save Time!

The E5CC/E5CC-U/E5EC/E5AC/E5DC series is extremely easy to operate using the instrument’s five front keys.

Smart!

With key features like simplicity in operation, Omron’s patented PID control, and 50ms sampling period, the E5CC/E5CC-U/E5EC/E5AC/E5DC sets a new standard in fast and precise temperature regulation.

Sampling period:50ms

Sampling Rate Sufficient to Handle Rapid Increases in Temperature

Independent heating/cooling PID

The heating and cooling PID can each be set individually. Also, autotuning (AT) will automatically set the PID constants.

Setting change protection

You can disable key operations to help prevent incorrect setting change.

Easy connections to a PLC with programless communications.

Advantages

・ The amount of work to set up the system is greatly reduced.
・ PLC programming and memory are not required for communications.
・ Communications even with multiple Temperature Controllers are automatically executed by the Temperature Controllers.
・ Interface converters are not required, which reduces costs.
・ Number of connected Digital Temperature Controllers: 32 max. (Up to 16 for the FX Series)

More Convenient Operations

The parameters can be copied from the master Temperature Controller to slave Temperature Controllers.
Master Temperature Controller can share RUN/STOP operations and set points with slave Temperature Controllers.
Slope and offsets can be set for the set point.
Note: A Temperature Controller with version 1.1 or higher is required.
A Temperature Controller with version 2.1 or higher is required for the FX Series.

E5AC-QX3ASM-800 Điều khiển nhiệt độ Omron