E3X-ZD41
Cảm biến sợi quang giá rẻ Omron
The simplest E3X-ZD series Easy Operation for Anyone
Amplifier unit (main body)
| Shapes | Connections | Model | |
|---|---|---|---|
| NPN output | PNP output | ||
 |
Pre-wired models | E3X-ZD11 2M | E3X-ZD41 2M |
 |
Connector models* | E3X-ZD6 | E3X-ZD8 |
* Suitable connectors: Please use the following simplified wiring connectors (each sold separately).
Simplified wiring connectors (each sold separately)
| Types | Shapes | Cable length | Quantity of conductors | Model |
|---|---|---|---|---|
| Master connectors |
 |
2m | 3-wire | E3X-CN11 |
| Slave-connectors |
 |
1-wire | E3X-CN12 |
Up to 16 units can be connected
Note:It can be mixed and used with other series (e.g., E3X-DA).
Precaution for making order for connectors of different models
(the main body and the connector are sold separately).
Please review the following combinations when making the order:
Accessories (each sold separately)
Metal fixing installation accessories
| Shapes | Model | Quantity |
|---|---|---|
 |
E39-L143 | 1 |
Rear pedestal
| Shapes | Model | Quantity |
|---|---|---|
 |
PFP-M | 1 |
Amplifier unit
| Item /Model | E3X-ZD[] | |
|---|---|---|
| Light source (emitted wavelength) |
Red AIGALNN LED (620nm) | |
| Power supply voltage | DC12 to 24V±10% Ripple (P-P) 10% max. | |
| Power consumption (current consumption) |
960mW max. (supply voltage 24V with current consumption 40mA max.) | |
| Control output | Open collector output (NPN or PNP) Load current 50mA max. (Residual voltage 1.5V max.) L-ON and D-ON pushbutton switch |
|
| Response time | Action•Reset: 200μs maximum for each | |
| Sensitivity adjustment | Teaching (With or without workpiece/Automatic) or manual adjustment | |
| Protection circuit | Power reverse protect, output short-circuit protection, reverse output polarity protection | |
| Digital display | Light power/Threshold 0 to 9999 | |
| Indicator (Orange) | L-ON/D-ON indicator, Teach mode indicator, Operation mode indicator | |
| Mutual interference prevention |
Light parallel (5 sets)* | |
| Vibration resistance(destruction) |
10 to 55Hz, 1.5mm double amplitude for 2h each in X, Y, and Z directions | |
| Shock resistance(destruction) |
500m/s2 for 3 times each in X, Y, and Z directions | |
| Ambient illumination | Incandescent lamp: 10,000lx max., Sunlight: 20,000lx max. | |
| Ambient temperature | Operation: Group of 1 to 3 Amplifiers: -25 to +55℃ (with no condensation) Group of 4 to 11 Amplifiers: -25 to +50℃ (with no condensation) Group of 12 to 16 Amplifiers: -25 to +45℃ (with no condensation) Storage: -30 to +70℃(with no condensation) |
|
| Ambient humidity | Operation and storage: 35 to 85%RH(with no condensation) | |
| Insulation resistance | 20MΩ minimum (DC500V) | |
| Dielectric strength | AC 1,000V 50/60Hz 1min | |
| Degree of protection | IEC60529 IP50 (with the protective cover) | |
| Weight (packaged state) | Pre-wired models: Approx. 100g, Simplified wiring plug-in models: Approx. 40g | |
| Materials | Case | Polybutylene phthalate (PBT) |
| cover | Polycarbonate (PC) | |
| Accessories | User Manual | |
* Please place the amplifiers as close as possible to each other for the mutual interference function.
Simplified wiring connectors
| Item /Model | E3X-CN11 | E3X-CN12 | |
|---|---|---|---|
| Rated current | 2.5A | ||
| Rated voltage | 50V | ||
| Contact resistance | 20MΩ max. (at DC20mV and 100mA max.) [Connected to the amplifier units and the connectors (wire resistance excluded)] |
||
| Plugging (destruction) | 50 times (connected to the amplifier units and the connectors) | ||
| Materials | Housing | Polybutylene phthalate (PBT) | |
| Contact | Phosphor bronze/Nickel-cadmium alloy plating (PC) | ||
| Weight (packaged state) | Approx. 55g | Approx. 25g | |
last update: February 03, 2014
Reviews
There are no reviews yet.