E3S-CD11 2M
Cảm biến quang chống nước-dầu Omron
Water- and Oil-resistant Photoelectric Sensor with Metal Housing Used for Long-range Sensing
Sensors
| Sensing method | Appearance | Connection method | Sensing distance | Model |
|---|---|---|---|---|
| Through-beam (Emitter + Receiver) * |
Horizontal
 |
Pre-wired | 30 m (Infrared light) | E3S-CT11 2M Emitter E3S-CT11-L 2M Receiver E3S-CT11-D 2M |
| Pre-wired Connector (M12) | E3S-CT11-M1J 0.3M Emitter E3S-CT11-L-M1J 0.3M Receiver E3S-CT11-D-M1J 0.3M |
|||
Vertical
 |
Pre-wired | E3S-CT61 2M Emitter E3S-CT61-L 2M Receiver E3S-CT61-D 2M |
||
| Pre-wired Connector (M12) | E3S-CT61-M1J 0.3M Emitter E3S-CT61-L-M1J 0.3M Receiver E3S-CT61-D-M1J 0.3M |
|||
| Retro-reflective | Horizontal
 |
Pre-wired | 3 m (Red light) | E3S-CR11 2M |
| Pre-wired Connector (M12) | E3S-CR11-M1J 0.3M | |||
Vertical
 |
Pre-wired | E3S-CR61 2M | ||
| Pre-wired Connector (M12) | E3S-CR61-M1J 0.3M | |||
| Diffuse-reflective | Horizontal
 |
Pre-wired | 700 mm (Infrared light) | E3S-CD11 2M |
| 2 m (Infrared light) | E3S-CD12 2M | |||
| Pre-wired Connector (M12) | 700 mm (Infrared light) | E3S-CD11-M1J 0.3M | ||
| 2 m (Infrared light) | E3S-CD12-M1J 0.3M | |||
Vertical
 |
Pre-wired | 700 mm (Infrared light) | E3S-CD61 2M | |
| 2 m (Infrared light) | E3S-CD62 2M | |||
| Pre-wired Connector (M12) | 700 mm (Infrared light) | E3S-CD61-M1J 0.3M | ||
| 2 m (Infrared light) | E3S-CD62-M1J 0.3M |
* Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Accessories (Order Separately)
Slits
(A Slit is not provided with Through-beam Sensors. Order a Slit separately if required.)
| Slit width | Sensing distance |
Minimum detectable object (reference value) |
Model | Quantity | Remarks |
|---|---|---|---|---|---|
| 0.5 mm × 11 mm | 1.8 m | 0.5-mm dia. | E39-S61 | 1 set each for Emitter and Receiver (8 Slits total) |
(Snap-in Long Slit) Can be used with the E3S-CT[]1(-M1J) Through-beam Sensor. Refer to Data Sheet. |
| 1 mm × 11 mm | 3.5 m | 1-mm dia. | |||
| 2 mm × 11 mm | 7 m | 2-mm dia. | |||
| 4 mm × 11 mm | 15 m | 2.6-mm dia. |
Reflectors
(A Reflector is required for each Retro-reflective Sensor)
The E39-R1 Reflector is provided with the Sensor. Order other Reflectors separately if required.
| Name | Sensing distance | Model | Quantity | Remarks | |
|---|---|---|---|---|---|
| Rated value |
Reference value | ||||
| Reflectors | 3 m | — | E39-R1 | 1 | Provided with the E3S-CR[]1(-M1J) Retro-reflective Sensor. |
| — | 4 m | E39-R2 | 1 | — | |
| Small Reflectors | — | 1.5 m | E39-R3 | 1 | — |
| — | 750 mm | E39-R4 | 1 | — | |
| Tape Reflectors | — | 700 mm (50 mm) * | E39-RS1 | 1 | Enables MSR function. |
| — | 1,100 mm (100 mm) * | E39-RS2 | 1 | ||
| — | 1,400 mm (100 mm) * | E39-RS3 | 1 | ||
Note: 1. If you use any Reflector other than the enclosed Reflector, make sure that the stability indicator lights properly
when you set the Sensor.
2. Refer to Reflectors on E39-L/E39-S/E39-R for details.
* Values in parentheses indicate the minimum distance required between the Sensor and Reflector.
when you set the Sensor.
2. Refer to Reflectors on E39-L/E39-S/E39-R for details.
* Values in parentheses indicate the minimum distance required between the Sensor and Reflector.
Mounting Brackets
Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required.
| Appearance | Model | Quantity | Remarks |
|---|---|---|---|
 |
E39-L102 | 1 | Provided with Horizontal Models. |
 |
E39-L103 | 1 | Provided with Vertical Models. |
 |
E39-L85 | 1 | Mounting bracket for changing from E3S-[][][][][]42/44 to E3S-C Vertical Models. |
 |
E39-L86 | 1 | Mounting bracket for changing from E3S-[][][][][]43 to E3S-C Vertical Models. |
 |
E39-L87 | 1 | — |
Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.
2. Refer to Mounting Brackets on E39-L/F39-L/E39-S/E39-R for details.
2. Refer to Mounting Brackets on E39-L/F39-L/E39-S/E39-R for details.
Sensor I/O Connectors (Sockets on One Cable End)
(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
| Cable | Appearance | Cable type | Model | |
|---|---|---|---|---|
| Fire-retardant, robot cable |
 |
2 m | 3-wire | XS2F-D421-DC0-F |
| 5 m | XS2F-D421-GC0-F | |||
 |
2 m | XS2F-D422-DC0-F | ||
| 5 m | XS2F-D422-GC0-F | |||
Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.
2. For details on Sensor I/O Connectors and cables such as vibration-proof robot cables, refer to Introduction to
Sensor I/O Connectors/Sensor Controllers.
2. For details on Sensor I/O Connectors and cables such as vibration-proof robot cables, refer to Introduction to
Sensor I/O Connectors/Sensor Controllers.
Reviews
There are no reviews yet.