Bộ điều khiển servo Delta ASD-A2-1543-E
Đặc điểm
Để đáp ứng các yêu cầu của máy công cụ đa năng và nâng cao lợi thế cạnh tranh trong thị trường tự động hóa công nghiệp, Delta Electronics, Inc. vui mừng thông báo rằng động cơ và bộ truyền động servo dòng ASDA-B2 mới hiệu suất cao và tiết kiệm chi phí đã được ra mắt vào thị trường.
Ứng dụng
Thông số
Attributes
PartNumber
ASD-A2-1543-E
Description
A2 Servo Drive, 1.5kW, 480V 3PH, EtherCat
Description
1650.00
Model Type
Ethercat
Built-in Ecam
No
Built-in Motion Profiles
Yes
Rated Output Power (kW)
1.5
Input Voltage / Phase
400VAC 3-phase
Continuous Output Current (Arms)
5.02
Cooling System
Fan Cooling
Encoder Resolution/Feedback Resolution
20-bit (1280000 p/rev)
Dynamic Brake
Built-in
Tuning Modes
Auto / Manual
Position Command Max Input Pulse Frequency
n/a
Position Command Pulse Type
n/a
Position Command Torque Limit
Set by Parameter
Speed Control Analog Input Voltage Range
n/a
Speed Control Range
1:5000
Speed Control Command Source
n/a
Torque Control Analog Input Voltage Range
n/a
Torque Control Command Source
n/a
Frequency Response Characteristic
Maximum 1kHz
Monitor Analog Output
n/a
Programmable Digital Input/Output
13 inputs/4 outputs
Pulse Output
Encoder Signal Output (ABZ line driver, Z open collector) Pulse Output is scalable by Parameter
Communication Interface
USB/EthetCat
Protection Functions
STO, Overcurrent, Overvoltage, Undervoltage, Regeneration error, Overload, Overspeed, Abnormal Pulse control, Excessive deviation, Excessive Deviation Full close loop, Watch dog execution time out, Encoder error, Adjustment error, E-Stop, Limit switch error, Serial Com error, Input Power Phase lost, Command write-in error, Terminal with short circuit protection (UVW, CN1, CN2, CN3 terminals)
IP Rating
IP20
Weight Kg(Lbs)
2.0(4.4)
Accessories
| ASD-A2EB1005 | Cable, ABS Encoder, 5 meter, Use with A2 300W-7.5kW (Cx10, Cx13, Ex13, Ex18, Gx13, Fx13, Fx18 / Jx10, Jx13, Kx13, Kx18, Lx13, Lx18) 230/480VAC motors with MS connectors | |
| ASD-CAEN1000 | Connector Kit, Encoder, for A2 300w-7.5kW (Cx10, Cx13, Ex13, Ex18, Gx13, Fx13, Fx18 / Jx10, Jx13, Kx13, Kx18, Lx13, Lx18) 230/480VAC motors with MS connectors | |
| ASD-CAEN1005 | Cable, Encoder, 5 meter, Use with A2 300w-7.5kW (Cx10, Cx13, Ex13, Ex18, Gx13, Fx13, Fx18 / Jx10, Jx13, Kx13, Kx18, Lx13, Lx18) 230/480VAC motors with MS connectors | |
| ASD-CAPW1000 | MS Power Connector, for A2 300W-3KW (Cx1010, Cx1020, Cx1330, Gx1309, Ex1315, Ex1320, Fx1313, Fx1318) 230V & 500W-3kW (J1010, J1020, Jx1330,K1305, K1310, K1315, K1320, Lx1305, Lx1308, L1313, Mx1309) 480V for B2 300W-3kW Cx1010, Cx1020, Cx1330, Gx1309, Ex | |
| ASD-CAPW1005 | Cable, Power, 5 meter, No Brake, Use with A2 300-1.5KW ( Cx10, Cx13, Ex13, Gx13, Fx13 / J1010, Lx13, K1310, K1315 ) 230/480V motors with MS connectors | |
| ASD-CAPW1105 | Cable, Power, 5 meter, With Brake, Use withA2 300-1.5KW ( Cx10, Cx13, Ex13, Gx13, Fx13 / J1010, Lx13, K1310, K1315 ) 230/480V motors with MS connectors | |
| ASD-CNSC0026 | Accessory, A2-E CN1 26-pin solder type connector | |
| ASD-MDSC2626 | Accessory, A2 CN1 26-pin break out Terminal board with cable | |
| ECMA-K11315RS | AC Servo Motor, 1.5kW, 480VAC, Med Inertia, Oil Seal, No Brake, Keyway w/Tap, INC 20 Bit | |
| ECMA-K11315SS | AC Servo Motor, 1.5kW, 480VAC, Med Inertia, Oil Seal, Brake, Keyway w/Tap, INC 20 Bit |
Reviews
There are no reviews yet.