AP-Z
Miếng che Công tắc hành trình Omron
Main Unit
Basic Models (General-purpose)
AP-Z Miếng che Công tắc hành trình OmronActuator | Classification | Standard | High-sensitivity | Extra-high sensitivity | High-capacity | Micro load | ||
---|---|---|---|---|---|---|---|---|
Contact gap |
G (0.5 mm) | H (0.25 mm) | H2 (0.20 mm) | E (1.8 mm) | H (0.25 mm) | |||
Terminal *1 | Model | Model | Model | Model | Model | |||
Pin plunger |
![]() |
![]() |
Z-15G | Z-15H | Z-15H2 | Z-15E | Z-01H | |
![]() |
Z-15G-B | Z-15H-B | Z-15H2-B | Z-15E-B | Z-01H-B | |||
Slim spring plunger |
![]() |
![]() |
Z-15GS | Z-15HS | — | — | Z-01HS | |
![]() |
Z-15GS-B | Z-15HS-B | Z-01HS-B | |||||
Short spring plunger |
![]() |
![]() |
Z-15GD | Z-15HD | — | Z-15ED | Z-01HD | |
![]() |
Z-15GD-B | Z-15HD-B | Z-15ED-B | Z-01HD-B | ||||
Panel mount plunger |
![]() |
Low OP |
![]() |
Z-15GQ3 | — | — | — | — |
![]() |
Z-15GQ3-B | |||||||
Medium OP |
![]() |
Z-15GQ | Z-15HQ | Z-15EQ | Z-01HQ | |||
![]() |
Z-15GQ-B | Z-15HQ-B | Z-15EQ-B | Z-01HQ-B | ||||
High OP |
![]() |
Z-15GQ8 | — | — | — | |||
![]() |
Z-15GQ8-B | |||||||
Panel mount roller plunger |
![]() |
![]() |
Z-15GQ22 | Z-15HQ22 | — | Z-15EQ22 | — | |
![]() |
Z-15GQ22-B | Z-15HQ22-B | Z-15EQ22-B | |||||
Panel mount cross roller plunger |
![]() |
![]() |
Z-15GQ21 | Z-15HQ21 | — | Z-15EQ21 | — | |
![]() |
Z-15GQ21-B | Z-15HQ21-B | Z-15EQ21-B | |||||
Leaf spring |
![]() |
![]() |
Z-15GL | — | — | — | — | |
![]() |
Z-15GL-B | |||||||
Roller leaf spring |
![]() |
![]() |
Z-15GL2 | — | — | — | — | |
![]() |
Z-15GL2-B | |||||||
Short hinge lever |
![]() |
![]() |
Z-15GW21 | — | — | — | — | |
![]() |
Z-15GW21-B | |||||||
Hinge lever |
![]() |
Low OP |
![]() |
Z-15GW | Z-15HW | — | — | — |
![]() |
Z-15GW-B | Z-15HW-B | ||||||
Medium OP |
![]() |
Z-15GW3 | — | |||||
![]() |
Z-15GW3-B | |||||||
High OP |
![]() |
Z-15GW32 | ||||||
![]() |
Z-15GW32-B | |||||||
Low-force hinge lever |
![]() |
![]() |
Z-15GW4 | Z-15HW24 | — | — | — | |
![]() |
Z-15GW4-B | Z-15HW24-B | ||||||
Low-force wire hinge lever |
![]() |
Low OP |
![]() |
— | Z-15HW78 | — | — | — |
![]() |
Z-15HW78-B | |||||||
High OP |
![]() |
Z-15HW52 | ||||||
![]() |
Z-15HW52-B | |||||||
Short hinge roller lever |
![]() |
![]() |
Z-15GW22 | Z-15HW22 | — | Z-15EW22 | Z-01HW22 | |
![]() |
Z-15GW22-B | Z-15HW22-B | Z-15EW22-B | Z-01HW22-B | ||||
Short hinge cross roller lever |
![]() |
![]() |
Z-15GW49 | — | — | — | — | |
![]() |
Z-15GW49-B | |||||||
Hinge roller lever |
![]() |
Standard |
![]() |
Z-15GW2 | Z-15HW2 | — | — | — |
![]() |
Z-15GW2-B | Z-15HW2-B | ||||||
Large roller |
![]() |
Z-15GW25 | — | — | — | |||
![]() |
Z-15GW25-B | |||||||
Hinge cross roller lever |
![]() |
![]() |
Z-15GW54 | — | — | — | — | |
![]() |
Z-15GW54-B | |||||||
Unidirectional short hinge roller lever |
![]() |
Parallel |
![]() |
Z-15GW2277 | — | — | — | — |
![]() |
Z-15GW2277-B | |||||||
Reverse hinge lever *2 |
![]() |
![]() |
Z-15GM | — | — | — | — | |
![]() |
Z-15GM-B | |||||||
Reverse short hinge roller lever *2 |
![]() |
![]() |
Z-15GM22 | — | — | — | — | |
![]() |
Z-15GM22-B | |||||||
Reverse hinge roller lever *2 |
![]() |
![]() |
Z-15GM2 | — | — | — | — | |
![]() |
Z-15GM2-B |

springs and the pin plungers are freed by operating the levers. Reverse-type models are highly vibration- and shock-
resistive because the pin plungers are normally pressed.
Minimum Order Lot
The following models are available at the minimum order lot specified below.
Orders must be placed per lot.
Classification | Standard | High-sensitivity | Minimum order lot (pcs) |
---|---|---|---|
Short spring plunger | Z-15GD-B | — | 10 |
Panel mount plunger | Z-15GQ Z-15GQ-B Z-15GQ8-B |
— | |
Panel mount roller plunger | Z-15GQ22 Z-15GQ22-B |
— | |
Panel mount cross roller plunger | Z-15GQ21-B | — | |
Short hinge lever | Z-15GW21-B | — | |
Hinge lever | Z-15GW Z-15GW-B |
— | |
Low-force hinge lever | Z-15GW4-B | Z-15HW24-B | |
Low-force hinge wire lever | — | Z-15HW78-B | |
Short hinge roller lever | Z-15GW22 Z-15GW22-B |
— | |
Hinge roller lever | Z-15GW2 Z-15GW2-B |
— | |
Reverse short hinge roller lever | Z-15GM22-B | — | |
Reverse hinge roller lever | Z-15GM2-B | — |
Split-contact Models
Actuator | Contact gap Terminal *1 | F (1.0 mm) | |
---|---|---|---|
Model | |||
Pin plunger |
![]() |
![]() |
— |
![]() |
Z-10FY-B | ||
Slim spring plunger |
![]() |
![]() |
— |
![]() |
Z-10FSY-B | ||
Short spring plunger |
![]() |
![]() |
— |
![]() |
Z-10FDY-B | ||
Panel mount plunger |
![]() |
![]() |
— |
![]() |
Z-10FQY-B | ||
Panel mount roller plunger |
![]() |
![]() |
— |
![]() |
Z-10FQ22Y-B | ||
Hinge lever |
![]() |
![]() |
— |
![]() |
Z-10FWY-B | ||
Short hinge roller lever |
![]() |
![]() |
— |
![]() |
Z-10FW22Y-B | ||
Hinge roller lever |
![]() |
![]() |
— |
![]() |
Z-10FW2Y-B | ||
Reverse short hinge roller lever *2 |
![]() |
![]() |
— |
![]() |
Z-10FM22Y-B |

springs and the pin plungers are freed by operating the levers. Reverse-type models are highly vibration- and shock-
resistive because the pin plungers are normally pressed.
Maintained-contact Models
Actuator | Model | |
---|---|---|
Pin plunger |
![]() |
Z-15ER |
Slim spring plunger |
![]() |
Z-15ESR |
Hinge lever |
![]() |
Z-15EWR |
Basic Models (Drip-proof Models (Standard, Microload))
Actuator | Classification | Standard | Micro load | |||
---|---|---|---|---|---|---|
Contact gap | G (0.5 mm) | H (0.25 mm) | ||||
Drip-proof terminal protective cover |
Not provided | Provided | Not provided | |||
Terminal *1 | Model | Model | Model | |||
Pin plunger |
![]() |
![]() |
Z-15G55 | — | Z-01H55 | |
![]() |
Z-15G55-B | Z-15GA55-B5V | Z-01H55-B | |||
Short spring plunger |
![]() |
![]() |
Z-15GD55 | — | Z-01HD55 | |
![]() |
Z-15GD55-B | Z-01HD55-B | ||||
Spring plunger |
![]() |
Low OP |
![]() |
Z-15GK55 | — | — |
![]() |
Z-15GK55-B | |||||
High OP |
![]() |
Z-15GK355 | — | — | ||
![]() |
Z-15GK355-B | Z-15GK3A55-B5V | ||||
Panel mount plunger |
![]() |
![]() |
Z-15GQ55 | — | — | |
![]() |
Z-15GQ55-B | Z-15GQA55-B5V | ||||
Panel mount roller plunger |
![]() |
![]() |
Z-15GQ2255 | — | — | |
![]() |
Z-15GQ2255-B | Z-15GQ22A55-B5V | ||||
Panel mount cross roller plunger |
![]() |
![]() |
— | — | — | |
![]() |
Z-15GQ2155-B | Z-15GQ21A55-B5V | ||||
Leaf spring |
![]() |
![]() |
Z-15GL55 | — | — | |
![]() |
Z-15GL55-B | |||||
Roller leaf spring |
![]() |
![]() |
Z-15GL255 | — | — | |
![]() |
Z-15GL255-B | |||||
Short hinge lever |
![]() |
![]() |
Z-15GW2155 | — | — | |
![]() |
Z-15GW2155-B | |||||
Long hinge lever |
![]() |
![]() |
Z-15GW4455 | — | — | |
![]() |
Z-15GW4455-B | Z-15GW44A55-B5V | ||||
Hinge lever |
![]() |
![]() |
Z-15GW55 | — | — | |
![]() |
Z-15GW55-B | Z-15GWA55-B5V | ||||
Short hinge roller lever |
![]() |
![]() |
Z-15GW2255 | — | Z-01HW2255 | |
![]() |
Z-15GW2255-B | Z-15GW22A55-B5V | Z-01HW2255-B | |||
Hinge roller lever |
![]() |
![]() |
Z-15GW255 | — | — | |
![]() |
Z-15GW255-B | Z-15GW2A55-B5V | ||||
Unidirectional short hinge roller lever |
![]() |
![]() |
Z-15GW227755 | — | — | |
![]() |
Z-15GW227755-B | Z-15GW2277A55-B5V | ||||
Reverse hinge lever *2 |
![]() |
![]() |
Z-15GM55 | — | — | |
![]() |
Z-15GM55-B | |||||
Reverse short hinge roller lever *2 |
![]() |
![]() |
Z-15GM2255 | — | — | |
![]() |
Z-15GM2255-B | |||||
Reverse hinge roller lever *2 |
![]() |
![]() |
Z-15GM255 | — | — | |
![]() |
Z-15GM255-B | |||||
Flexible rod (coil spring) *3 |
![]() |
![]() |
Z-15GNJ55 | — | — | |
![]() |
Z-15GNJ55-B |

springs and the pin plungers are freed by operating the levers.
*3. The tip is made of resin.
Minimum Order Lot
The following models are available at the minimum order lot specified below.
Orders must be placed per lot.
Classification Contact gap | Standard | Minimum order lot (pcs) | |
---|---|---|---|
G (0.5 mm) | |||
Short spring plunger | Z-15GD55-B | 10 | |
Spring plunger | Z-15GK55-B | ||
Hinge lever | Z-15GW4455-B Z-15GW55 Z-15GW55-B |
||
Short hinge roller lever | Z-15GW2255 Z-15GW2255-B |
||
Hinge roller lever | Z-15GW255-B | ||
Flexible rod (coil spring) | Z-15GNJ55-B |
Basic Models (Drip-proof Models (High-sensitivity))
Classification Contact gap Drip-proof terminal protective cover Terminal * |
High-sensitivity | ||
---|---|---|---|
H (0.25 mm) | |||
Not provided | |||
Model | |||
Flexible rod |
![]() |
![]() |
Z-15HNJS55 |
(steel wire) |
![]() |
Z-15HNJS55-B |

Minimum Order Lot
The following models are available at the minimum order lot specified below.
Orders must be placed per lot.
Classification | High-sensitivity | Minimum order lot (pcs) | |
---|---|---|---|
Contact gap | H (0.25 mm) | ||
Flexible rod (steel wire) | Z-15HNJS55-B | 10 |
Accessories (Order Separately)
Drip-proof Terminal Cover (Order Separately)
The Drip-proof Terminal Protective Cover is provided for maintenance for Z-[]A55-B5V Switches.
Name | Model |
---|---|
Drip-proof Terminal Protective Cover | AP-DV |
Terminal Covers (Sold Separately)
The Terminal Covers can be attached to Z, A, X, and DZ Switches.
The Terminal Cover is secured with mounting screws and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open for providing holes for lead cables at desired points.
A terminal cover can’t be used in the case of using an actuator sold separately.
Application | Soldering terminal use |
Screw terminal use |
Remarks | |
---|---|---|---|---|
Material | Mounting direction | Model | ||
Phenol resin | Side mounting | AP-A | AP-B | — |
Metal press mold | Side mounting | AP1-A | AP1-B | Used for AP-A and AP-B |
Vinyl chloride | Side mounting | AP-Z | — |
Note: Use a Terminal Cover for screw terminals fir DZ-series Switches with soldering terminals.
Separator (Sold Separately)
Use a Separator when it is difficult to provide a sufficient insulation distance or when using the Switch near metal parts or copper wires.
Model |
---|
SEPARATOR FOR Z |
Actuators (Sold Separately)
A Switch can be actuated by a cam or an appropriate object, in which case, use one of the following Actuators according to the application.
Actuator | Common to Z and X models | ||
---|---|---|---|
Hinge lever | ![]() |
XAA-1 | |
Hinge roller lever | ![]() |
ZAA-2 | |
Panel mount plunger | ![]() |
Short | ZAQ-3 |
Medium | ZAQ-2 | ||
Long | ZAQ-1 | ||
Panel mount roller plunger | ![]() |
ZAQ-22 |
Reviews
There are no reviews yet.