AJ65SBTB1-8D
DC input module
Input: 8 points, 24 V DC, positive/negative common, 1-wire, response time: 1.5 ms
External interface: screw terminal block
| Technical specification | |
| No. of inputs: | 8 |
| Isolation method: | Photocoupler |
| Rated input voltage: | 24V d.c. |
| Rated input current: | Approx. 7mA |
| Operating voltage range: | 19.2 to 26.4V d.c. (ripple ratio: within 5%) |
| ON voltage/ON current: | 14V or higher/3.5mA or higher |
| OFF voltage/OFF current: | 6V or lower/1.7mA or lower |
| Input resistance: | Approx. 3.3kΩ |
| Response time: | |
| OFF—ON: | 1.5ms or lower (when 24V d.c.) |
| ON—OFF: | 1.5ms or lower (when 24V d.c.) |
| Wiring method for common: | 8 point/common (2 points) |
| (terminal block 1-wire type) | |
| Input format: | Positive/negative common shared type |
| (sink/source shared type) | |
| No. of occupied stations: | 1 station 32 points assignment (use 8 points) |
| I/O module power supply: | |
| Voltage: | 20.4 to 26.4V d.c. (ripple ratio: within 5%) |
| Current: | 30mA or lower (when 24V d.c., all points ON) |
| Network speed: | Up to 10Mbps |
| Network distance: | Up to 1.2km |
The MELSEC Series is constantly looking ahead to meet your future demands and expectations.
High performance and future proof solutions are delivered by the enhanced lineup and network systems. The MELSEC PLC series lineup consists of two main groups:
Modular PLC with the iQ-R and Q Series, Compact PLC with iQ F and FX Series
Reviews
There are no reviews yet.