AJ65SBTB1-16D1
DC input module
Input: 16 points, 24 V DC, positive/negative common, 1-wire, response time: 0.2 ms
External interface: screw terminal block
| Technical specification | |
| No. of inputs: | 16 |
| Isolation method: | Photocoupler |
| Rated input voltage: | 24V d.c. |
| Rated input current: | Approx. 7mA |
| Operating voltage range: | 19.2 to 26.4V d.c. (ripple ratio: within 5%) |
| ON voltage/ON current: | 14V or higher/3.5mA or higher |
| OFF voltage/OFF current: | 6V or lower/1.7mA or lower |
| Input resistance: | Approx. 3.3kΩ |
| Response time: | |
| OFF—ON: | 0.2ms or lower (when 24V d.c.) |
| ON—OFF: | 0.2ms or lower (when 24V d.c.) |
| Wiring method for common: | 16 points/common (2 points) |
| (terminal block 1-wire type) | |
| Input format: | Positive/negative common shared type |
| (sink/source shared type) | |
| No. of occupied stations: | 1 station 32 points assignment (use 16 points) |
| I/O module power supply: | |
| Voltage: | 20.4 to 26.4V d.c. (ripple ratio: within 5%) |
| Current: | 35mA or lower (when 24V d.c., all points ON) |
| Network speed: | Up to 10Mbps |
| Network distance: | Up to 1.2km |
Features:
- Up to 64 I/O modules with a maximum of 32 inputs or 32 outputs each
can be connected - Compact design which is tough and highly shock-resistant
- Status indicator LEDs for the inputs
- Modules can be positioned in a horizontal arrangement or one of four orientations
on a flat surface. - DIN rail or screw mounting
The MELSEC Series is constantly looking ahead to meet your future demands and expectations.
High performance and future proof solutions are delivered by the enhanced lineup and network systems. The MELSEC PLC series lineup consists of two main groups:
Modular PLC with the iQ-R and Q Series, Compact PLC with iQ F and FX Series
Reviews
There are no reviews yet.