AJ65SBTB3-16D

DC input module

Input: 16 points, 24 V DC, positive/negative common, 3-wire, response time: 1.5 ms
External interface: screw terminal block

Technical details

• Manufacturer : Mitsubishi Electric
• AJ65SBTB3-16D
• CC-Link small type remote I / O unit (DC input, terminal block) AJ65SBTB3-16D
• Input format : DC input (plus common / minus common common type)
• Number of input points : 16 points
• Rated input voltage : DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 26.4 V)
• Rated input current : About 7 mA
• Maximum number of simultaneous input points : 100%
• ON voltage / ON current : 14 V or more / 3.5 mA or more
• OFF voltage / OFF current : 6 V or less / 1.7 mA or less
• Input resistance : About 3.3 kΩ
• Input response time OFF → ON : 1.5 ms or less (24 VDC)
• ON → OFF : 1.5 ms or less (24 VDC)
• Input common type : 16 points 1 common (terminal trapezoid 3 wire type)
• Input isolation method : Photocoupler isolation
• Withstand voltage : Between DC external terminal and ground: AC 500 V for 1 minute
• Insulation resistance : DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more
• Protection grade : IP2X
• Station type : Remote I / O station
• Number of occupied stations : 1 station
• Unit power supply Voltage : DC 20.4 to 26.4 V (ripple ratio within 5%)
• Current : 45 mA or less (24 VDC, all points ON)
• External wiring connection method : Communication part, unit power supply part: 7 points 2 piece terminal block (M3 screw) I / O power supply part, input / output part: 34 points Direct mounting terminal block (M3 screw)
• External dimensions Height (H) : 50 mm
• Width (W) : 179 mm
• Depth (D) : 40 mm
• mass : 0.25 Kg
• Operating ambient temperature : 0 to 55 ° C
• Storage ambient temperature : -20 to 75 ° C
• Ambient operating humidity : 10 to 90% RH, non condensing
• Storage ambient humidity : 10 to 90% RH, non condensing
• Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions
• When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2
• Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)
• Use atmosphere : No corrosive gas
• Use elevation : 0 to 2000 m
• Installation location : In the control panel
• Over voltage category : II or less
• Pollution degree : 2 or less
• Shipping Weight : 1.3 Kg

The MELSEC Series is constantly looking ahead to meet your future demands and expectations.
High performance and future proof solutions are delivered by the enhanced lineup and network systems. The MELSEC PLC series lineup consists of two main groups:

Modular PLC with the iQ-R and Q Series, Compact PLC with iQ F and FX Series