Z-15HW24 Công tắc hành trình Omron

226 lượt xem

Ngày: 08/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Xin vui lòng liên hệ theo thông tin dưới dây

0936.296.483 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

Main Unit

Basic Models (General-purpose)

ActuatorClassificationStandardHigh-sensitivityExtra-high sensitivityHigh-capacityMicro load
Contact
gap
G (0.5 mm)H (0.25 mm)H2 (0.20 mm)E (1.8 mm)H (0.25 mm)
Terminal *1ModelModelModelModelModel
Pin plunger
Z-15GZ-15HZ-15H2Z-15EZ-01H
Z-15G-BZ-15H-BZ-15H2-BZ-15E-BZ-01H-B
Slim spring
plunger
Z-15GSZ-15HSZ-01HS
Z-15GS-BZ-15HS-BZ-01HS-B
Short spring
plunger
Z-15GDZ-15HDZ-15EDZ-01HD
Z-15GD-BZ-15HD-BZ-15ED-BZ-01HD-B
Panel
mount
plunger
Low
OP
Z-15GQ3
Z-15GQ3-B
Medium
OP
Z-15GQZ-15HQZ-15EQZ-01HQ
Z-15GQ-BZ-15HQ-BZ-15EQ-BZ-01HQ-B
High
OP
Z-15GQ8
Z-15GQ8-B
Panel mount
roller plunger
Z-15GQ22Z-15HQ22Z-15EQ22
Z-15GQ22-BZ-15HQ22-BZ-15EQ22-B
Panel mount
cross roller plunger
Z-15GQ21Z-15HQ21Z-15EQ21
Z-15GQ21-BZ-15HQ21-BZ-15EQ21-B
Leaf spring
Z-15GL
Z-15GL-B
Roller leaf spring
Z-15GL2
Z-15GL2-B
Short hinge lever
Z-15GW21
Z-15GW21-B
Hinge
lever
Low
OP
Z-15GWZ-15HW
Z-15GW-BZ-15HW-B
Medium
OP
Z-15GW3
Z-15GW3-B
High
OP
Z-15GW32
Z-15GW32-B
Low-force
hinge lever
Z-15GW4Z-15HW24
Z-15GW4-BZ-15HW24-B
Low-force
wire hinge
lever
Low
OP
Z-15HW78
Z-15HW78-B
High
OP
Z-15HW52
Z-15HW52-B
Short hinge
roller lever
Z-15GW22Z-15HW22Z-15EW22Z-01HW22
Z-15GW22-BZ-15HW22-BZ-15EW22-BZ-01HW22-B
Short hinge
cross roller
lever
Z-15GW49
Z-15GW49-B
Hinge
roller
lever
Standard
Z-15GW2Z-15HW2
Z-15GW2-BZ-15HW2-B
Large
roller
Z-15GW25
Z-15GW25-B
Hinge cross
roller lever
Z-15GW54
Z-15GW54-B
Unidirectional
short hinge
roller lever
Parallel
Z-15GW2277
Z-15GW2277-B
Reverse hinge
lever *2
Z-15GM
Z-15GM-B
Reverse
short hinge
roller lever *2
Z-15GM22
Z-15GM22-B
Reverse hinge
roller lever *2
Z-15GM2
Z-15GM2-B
Z Lineup 3
*2. The pin plungers of reverse-type models are continuously pressed by the actuator levers with compression coil
springs and the pin plungers are freed by operating the levers. Reverse-type models are highly vibration- and shock-
resistive because the pin plungers are normally pressed.

Minimum Order Lot

The following models are available at the minimum order lot specified below.
Orders must be placed per lot.

ClassificationStandardHigh-sensitivityMinimum order lot (pcs)
Short spring plungerZ-15GD-B10
Panel mount plungerZ-15GQ
Z-15GQ-B
Z-15GQ8-B
Panel mount roller plungerZ-15GQ22
Z-15GQ22-B
Panel mount cross roller plungerZ-15GQ21-B
Short hinge leverZ-15GW21-B
Hinge leverZ-15GW
Z-15GW-B
Low-force hinge leverZ-15GW4-BZ-15HW24-B
Low-force hinge wire leverZ-15HW78-B
Short hinge roller leverZ-15GW22
Z-15GW22-B
Hinge roller leverZ-15GW2
Z-15GW2-B
Reverse short hinge roller leverZ-15GM22-B
Reverse hinge roller leverZ-15GM2-B

Split-contact Models

ActuatorContact gap Terminal *1F (1.0 mm)
Model
Pin plunger
Z-10FY-B
Slim spring plunger
Z-10FSY-B
Short spring plunger
Z-10FDY-B
Panel mount plunger
Z-10FQY-B
Panel mount roller plunger
Z-10FQ22Y-B
Hinge lever
Z-10FWY-B
Short hinge roller lever
Z-10FW22Y-B
Hinge roller lever
Z-10FW2Y-B
Reverse short hinge roller lever *2
Z-10FM22Y-B
Z Lineup 7
*2. The pin plungers of reverse-type models are continuously pressed by the actuator levers with compression coil
springs and the pin plungers are freed by operating the levers. Reverse-type models are highly vibration- and shock-
resistive because the pin plungers are normally pressed.

Maintained-contact Models

ActuatorModel
Pin plunger
Z-15ER
Slim spring plunger
Z-15ESR
Hinge lever
Z-15EWR

Basic Models (Drip-proof Models (Standard, Microload))

ActuatorClassificationStandardMicro load
Contact gapG (0.5 mm)H (0.25 mm)
Drip-proof
terminal
protective
cover
Not providedProvidedNot provided
Terminal *1ModelModelModel
Pin plunger
Z-15G55Z-01H55
Z-15G55-BZ-15GA55-B5VZ-01H55-B
Short spring plunger
Z-15GD55Z-01HD55
Z-15GD55-BZ-01HD55-B
Spring
plunger
Low
OP
Z-15GK55
Z-15GK55-B
High
OP
Z-15GK355
Z-15GK355-BZ-15GK3A55-B5V
Panel mount
plunger
Z-15GQ55
Z-15GQ55-BZ-15GQA55-B5V
Panel mount
roller plunger
Z-15GQ2255
Z-15GQ2255-BZ-15GQ22A55-B5V
Panel mount
cross roller
plunger
Z-15GQ2155-BZ-15GQ21A55-B5V
Leaf spring
Z-15GL55
Z-15GL55-B
Roller leaf spring
Z-15GL255
Z-15GL255-B
Short hinge lever
Z-15GW2155
Z-15GW2155-B
Long hinge lever
Z-15GW4455
Z-15GW4455-BZ-15GW44A55-B5V
Hinge lever
Z-15GW55
Z-15GW55-BZ-15GWA55-B5V
Short hinge
roller lever
Z-15GW2255Z-01HW2255
Z-15GW2255-BZ-15GW22A55-B5VZ-01HW2255-B
Hinge
roller lever
Z-15GW255
Z-15GW255-BZ-15GW2A55-B5V
Unidirectional
short hinge
roller lever
Z-15GW227755
Z-15GW227755-BZ-15GW2277A55-B5V
Reverse
hinge lever *2
Z-15GM55
Z-15GM55-B
Reverse short
hinge roller
lever *2
Z-15GM2255
Z-15GM2255-B
Reverse hinge
roller lever *2
Z-15GM255
Z-15GM255-B
Flexible rod
(coil spring) *3
Z-15GNJ55
Z-15GNJ55-B
Z Lineup 10
*2. The pin plungers of reverse-type models are continuously pressed by the actuator levers with compression coil
springs and the pin plungers are freed by operating the levers.
*3. The tip is made of resin.

Minimum Order Lot

The following models are available at the minimum order lot specified below.
Orders must be placed per lot.

Classification Contact gapStandardMinimum order lot (pcs)
G (0.5 mm)
Short spring plungerZ-15GD55-B10
Spring plungerZ-15GK55-B
Hinge leverZ-15GW4455-B
Z-15GW55
Z-15GW55-B
Short hinge roller leverZ-15GW2255
Z-15GW2255-B
Hinge roller leverZ-15GW255-B
Flexible rod (coil spring)Z-15GNJ55-B

Basic Models (Drip-proof Models (High-sensitivity))

Classification
Contact gap
Drip-proof terminal protective cover
Terminal *
High-sensitivity
H (0.25 mm)
Not provided
Model
Flexible rod
Z-15HNJS55
(steel wire)
Z-15HNJS55-B
Z Lineup 13

Minimum Order Lot

The following models are available at the minimum order lot specified below.
Orders must be placed per lot.

ClassificationHigh-sensitivityMinimum order lot (pcs)
Contact gapH (0.25 mm)
Flexible rod (steel wire)Z-15HNJS55-B10

Accessories (Order Separately)

Drip-proof Terminal Cover (Order Separately)

The Drip-proof Terminal Protective Cover is provided for maintenance for Z-[]A55-B5V Switches.

NameModel
Drip-proof Terminal Protective CoverAP-DV

Terminal Covers (Sold Separately)

The Terminal Covers can be attached to Z, A, X, and DZ Switches.
The Terminal Cover is secured with mounting screws and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open for providing holes for lead cables at desired points.
A terminal cover can’t be used in the case of using an actuator sold separately.

ApplicationSoldering
terminal use
Screw
terminal use
Remarks
MaterialMounting directionModel
Phenol resinSide mountingAP-AAP-B
Metal press moldSide mountingAP1-AAP1-BUsed for AP-A and AP-B
Vinyl chlorideSide mountingAP-Z

Note: Use a Terminal Cover for screw terminals fir DZ-series Switches with soldering terminals.

Separator (Sold Separately)

Use a Separator when it is difficult to provide a sufficient insulation distance or when using the Switch near metal parts or copper wires.

Model
SEPARATOR FOR Z

Actuators (Sold Separately)

A Switch can be actuated by a cam or an appropriate object, in which case, use one of the following Actuators according to the application.

ActuatorCommon to Z and X models
Hinge lever289_lu_12_1XAA-1
Hinge roller lever289_lu_12_2ZAA-2
Panel mount plunger289_lu_12_3ShortZAQ-3
MediumZAQ-2
LongZAQ-1
Panel mount roller plunger289_lu_12_4ZAQ-22
NHẬN XÉT SẢN PHẨM