X-10GW22-B Công tắc hành trình Omron

231 lượt xem

Ngày: 08/06/2019

Hết Hàng

Thông tin sản phẩm

295,000

Hết hàng

Xin vui lòng liên hệ theo thông tin dưới dây

0936.296.483 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

TerminalSolder terminal

Screw terminal

ActuatorModelModel
Pin plunger
X-10GX-10G-B
Slim spring plunger
X-10GSX-10GS-B
Short spring plunger
X-10GDX-10GD-B
Panel mount plunger
X-10GQX-10GQ-B
Panel mount roller plunger
X-10GQ22X-10GQ22-B
Panel mount cross roller plunger
X-10GQ21X-10GQ21-B
Leaf spring
X-10GLX-10GL-B
Short hinge lever
X-10GW21X-10GW21-B
Hinge lever
X-10GWX-10GW-B
Low-force hinge lever
X-10GW4X-10GW4-B
Short hinge roller lever
X-10GW22X-10GW22-B
Hinge roller lever B
X-10GW2X-10GW2-B
Reverse hinge lever
X-10GMX-10GM-B
Reverse short hinge roller lever *
X-10GM22X-10GM22-B
Reverse hinge roller lever *
X-10GM2X-10GM2-B
* The plungers of reverse-type models are continuously pressed by the compression coil springs and the plungers are
freed by operating the levers.

Accessories (Order Separately)

Terminal Covers (Sold Separately)

The Terminal Covers can be attached to Z, A, X, and DZ Switches.
The Terminal Cover is secured with mounting screws and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open for providing holes for lead cables at desired points.
A terminal cover can’t be used in the case of using an actuator sold separately.

ApplicationSoldering
terminal use
Screw
terminal use
Remarks
MaterialMounting directionModel
Phenol resinSide mountingAP-AAP-B
Metal press moldSide mountingAP1-AAP1-BUsed for AP-A and AP-B
Vinyl chlorideSide mountingAP-Z

Note: Use a Terminal Cover for screw terminals fir DZ-series Switches with soldering terminals.

Separator (Sold Separately)

Use a Separator when it is difficult to provide a sufficient insulation distance or when using the Switch near metal parts or copper wires.

Model
SEPARATOR FOR Z

Actuators (Sold Separately)

A Switch can be actuated by a cam or an appropriate object, in which case, use one of the following Actuators according to the application.

ActuatorCommon to Z and X models
Hinge lever291_lu_4_1XAA-1
Hinge roller lever291_lu_4_2ZAA-2
Panel mount plunger291_lu_4_3ShortZAQ-3
MediumZAQ-2
LongZAQ-1
Panel mount roller plunger291_lu_4_4ZAQ-22
NHẬN XÉT SẢN PHẨM