R60ADI8-HA mô đun 8AI MELSEC iQ-R

60 lượt xem

Ngày: 29/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Đảm bảo 100% hàng chính hãng

Dịch vụ khách hàng tốt nhất

0936.296.483 (hotline)

0936.296.483 (Hỗ trợ kỹ thuật)

R60ADI8-HA mô đun 8AI MELSEC iQ-R

Analog input module specifications

Item R60AD4 R60ADV8 R60ADI8 R60ADI8-HA R60AD8-G R60AD16-G
Number of analog input points (ch) 4 8 8 8 8 16
Accuracy
Ambient temperature 25±5℃ ±0.1% ±0.1% ±0.1% ±0.1% ±0.1% ±0.1%
Ambient temperature 0…55℃ ±0.3% ±0.3% ±0.3% ±0.3%
Temperature coefficient ±35ppm/℃ ±35ppm/℃
Common
Conversion speed (ch) 80 µs 80 µs 80 µs 80 ms/8 CH 10 ms 10 ms
Channel isolation Transformer isolation Transformer isolation
Absolute max. input ±15 V, 30 mA ±15 V 30 mA 30 mA ±15 V, 30 mA ±15 V, 30 mA
SIL 2-compliant *1
HART® communication
Voltage input
Analog input voltage (V DC) -10…10 -10…10 -10…10 -10…10
Digital output value -32000…32000 -32000…32000 -32000…32000 -32000…32000
Current input
Analog input current (mA DC) 0…20 0…20 4…20 0…20 0…20
Digital output value 0…32000 0…32000 0…32000 0…32000 0…32000
External interface*2
18-point screw terminal block
40-pin connector ● (2x)
Spring-clamp terminal block

 

High-speed analog input module specifications

Item R60ADH4
Number of analog input points (ch) 4
Accuracy
Ambient temperature 25 ±5℃ ±0.1%
Ambient temperature 0…55℃ ±0.2%
Input specifications
Operation mode (sampling cycle) Normal mode (medium speed: 10 μs/CH)
Normal mode (low speed: 20 μs/CH)
Simultaneous conversion mode (5 μs/4CH)
Absolute max. input ±15 V, 30 mA
Voltage input
Analog input voltage (V DC) -10…10
Digital output value -32000…32000
Current input
Analog input current (mA DC) 0…20
Digital output value 0…32000
External interface*2
18-point screw terminal block

 

Temperature input module specifications

Item R60TD8-G R60RD8-G
Number of analog input points (ch) 8 8
Cold junction temperature compensation accuracy ±1.0℃
Usable thermocouple B, R, S, K, E, J, T, N
Usable RTD Pt100, JPt100, Ni100, Pt50
Resolution B, R, S, N: 0.3℃
K, E, J, T: 0.1℃
0.1℃
Conversion speed (ch) 30 ms 10 ms
Channel isolation Transformer isolation Transformer isolation
Wire break detection
Output
Measured temperature value (16-bit signed binary data) -2700…18200 -2000…8500
Scaling value (16-bit signed binary data)
External interface*2
40-pin connector
*1: When used together with a SIL 2 redundant control system (SIL 2 is supported in the module firmware version of “02” or later).
*2: For applicable options, please refer to the relevant product manual.
NHẬN XÉT SẢN PHẨM