KEW 6201A thiết đo đa năng Kyoritsu

109 lượt xem

Ngày: 09/06/2020

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Xin vui lòng liên hệ theo thông tin dưới dây

0936.296.483 (Liên hệ mua hàng) Email: THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

KEW 6201A

Portable Appliance Testers

The KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of ClassI and ClassII appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are four LEDs which unambiguously display a pass or fail indication for threshold values dictated by AS/NZS 3760.

Thông số kĩ thuật

This instrument is suitable for performing tests as required by the following standards.
AS/NZS 3760 In-service safety inspection and testing of electrical equipment.

Test Function
FunctionTests of contents
Test ⅠClassProtective conductor resistance
Insulation (250V or 500V)
Test ⅠSELECT Switch + ClassProtective conductor resistance
Leakage Current test
TestⅡClassInsulation (250V or 500V)
TestⅡSELECT Switch + ClassLeakage Current test
Extension Leads testProtective conductor resistance
Insulation P/N-PE
SELECT Switch + Extension Leads testProtective conductor resistance
Leakage Current test
Leakage Current TestLeakage current measurement

RPE 20Ω Protective Conductor Resistance Test

Measuring range 0 – 15.00Ω
Resolution of measurement10mΩ
Open circuit voltage< AC 12V
Measuring current10A AC nominal value

RINS 200MΩ Insulation Resistance

Measuring range0 – 19.99Ω
Resolution of measurement10kΩ
Output voltage250V DC (+20%/-10%) @1MΩ500V DC (+20%/-10%) @1MΩ
Short circuit current2.5mA DC or less

Leakage Current Test

Measuring rangeAC 0.1 – 19.99mA
Resolution of measurement0.01mA
Examination timeMax 15 seconds

AC VOLT Mains Voltage Check

Measuring range207 – 264V
Resolution of measurement1V


Supply voltage240V±10%
Applicable standardsIEC 61010-1 CAT III 300V Pollution Degree2
IEC 61326-1 (EMC)
Dimensions167(L) × 185 (W) × 89 (D) mm
Weight1.2kg (only the instrument body)
Included Accessories7123 (Power cord [AU])
7129A (Test leads with alligator clip)
7161A (Flat test prod [black])
7140 (Adapter for exntesion cord)
9147 (Cord case)
9121 (Shoulder strap)
Instruction manual
Optional Accessories7121B (Distribution board test leads)