KEW 1062 đồng hồ đo vạn năng Kyoritsu

54 lượt xem

Ngày: 06/06/2020

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Xin vui lòng liên hệ theo thông tin dưới dây

0936.296.483 (Liên hệ mua hàng) Email: THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

KEW 1062

Digital Multimeters

High Accuracy, High Performance and Reliable Measurements
• 0.02% basic DC accuracy
• Large display with 50,000 counts
• Dual display for double indication for AC and DC, V and Hz, etc.
• True-RMS Measurements AC and AC+DC
• Wide AC Frequency bandwidth from 10Hz to 100kHz
• True-RMS or MEAN value detection mode can be selected
• Fast Peak Hold response time of 250µs
• Low-pass filter for motor drive measurements
• Low Power Ω for resistance measurements on sensible electronic circuits by a low and safe test current
• User calibration function

Safety design for industrial use
• Complies with IEC 61010-1 CAT IV 600V, CAT III 1000V
• Terminal shutter to prevent incorrect test leads’ insertion in current terminals
• Very wide operating temperature range from -20 to 55ºC

Reliable support for data management
• Large data internal memory
KEW 1062: 10,000 data (logging), 100 data (manual)
• Download data and Live Monitoring on a PC via the USB interface
(Option for USB Communication set)
* MAX 32,767 data can be transferred.

Thông số kĩ thuật

Detection modeMEAN/RMS (switch)
DC V50.000/500.00/2400.0mV/5.0000/50.000/500.00/1000.0V
(Input impedance: Approx. 100MΩ [50/500/2400mV], 10MΩ [5/50/500/1000V])
±0.02%rdg±2dgt (Basic accuracy)
AC V [RMS]50.000/500.00mV/5.0000/50.000/500.00/1000.0V
(Input impedance: 11MΩ<50pF [50/500mV/5V], 10MΩ<50pF [50/500/1000V])
±0.4%rdg±30dgt (Basic accuracy)
AC V [MEAN]50.000/500.00mV/ 5.0000/50.000/500.00/1000.0V
(Input impedance:11MΩ<50pF [50/500mV/5V],10MΩ<50pF [50/500/1000V])
±1%rdg±30dgt (Basic accuracy)
(Input impedance: 11MΩ<50pF [5V], 10MΩ<50pF [50/500/1000V])
±0.5%rdg±10dgt (Basic accuracy)
DC A500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
±0.2%rdg±5dgt (Basic accuracy)
AC A [RMS]500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
±0.75%rdg±20dgt (Basic accuracy)
AC A [MEAN]500.00/5000.0µA/50.000/500.00mA/ 5.0000/10.000A
±1.5%rdg±20dgt (Basic accuracy)
±1%rdg±10dgt (Basic accuracy)
±0.05%rdg±2dgt (Basic accuracy)
±0.2%rdg±3dgt (Basic accuracy)
Continuity buzzer500.0Ω (The buzzer turns on for resistances lower than 100±50Ω)
Diode test2.4000V ±1%rdg±2dgt
Open curcuit voltage: <5V (Approx. 0.5mA Measuring Current)
±1%rdg±5dgt (Basic accuracy)
Frequency2.000 – 9.999/9.00 – 99.99/90.0 – 999.9Hz/0.900 – 9.999/9.00 – 99.99kHz
±0.02%rdg±1dgt (Basic accuracy)
DUTY10 – 90% ±1%rdg
Temperature-200 – 1372ºC ±1%rdg±1.5ºC
-328 – 2501.6ºF ±1%rdg±2.0ºF
(with the use of K-type Temperature probe)
Measurement functionsDC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature, Capacitor, Duty cycle ratio, Decibel (dBV, dBm), Continuity Check, Diode Test, LowPower-Ω
Other functionsData Hold (D/H), Auto Hold (A/H), Peak Hold (P/H), Range Hold (R/H), Maximum value (MAX), Minimum value (MIN), Average value (AVG), Zero Adjustment (Capacitor, Resistance), Relative values, Save to Memory, LCD backlight
Applicable standardsIEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree 2,
IEC 61010-031, IEC 61326-1 (EMC)
Power sourceR6 (1.5V)×4 (Auto power off: approx. 20 minutes)
Dimensions192(L)×90(W)×49(D) mm
WeightApprox. 560g (including batteries)
Included Accessories7220A (Test leads), R6×4, Instruction manual,
8926 (Fuse [440mA/1000V])×1 (included)
8927 (Fuse [10A/1000V])×1 (included)
Crocodile clip test lead7234CAT IV 600V, CAT III 1000V
AC/DC Clamp Sensor8115AC 130A / DC 180A
Clamp sensor8121AC 100A
8122AC 500A
8123AC 1000A
8146AC 30A
8147AC 70A
8148AC 100A
Banana Ø4mm Adjuster Plug7146length:190mm
USB Communication set8241USB adaptor + USB cable + DMM Software
DMM Printer full set82498243+8246+8248
Printer Communication set8243Printer Adapter + RS232 cable
Printer8246Printer + Thermal paper (1 roll)
AC adapter for printer [EU]8248AAC230V±10%
Thermal paper for printer824710 rolls
Carrying case9154for the main unit with testi leads and communication cable
Thermocouple Type K Specification
Temperature probes8405-40ºC – 500ºC
(Surface type, Point material: Ceramic)
8406-40ºC – 500ºC (Surface type)
8407-40ºC – 700ºC (Liquid, Semi-solid)
8408-40ºC – 600ºC (Air, Gas)