Màn hình cảm ứng 4.3 inch HP043-20DT tích hợp PLC Kinco

19 lượt xem

Ngày: 18/09/2020

Tình trạng : Còn Hàng

Thông tin sản phẩm


Xin vui lòng liên hệ theo thông tin dưới dây

0936.296.483 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

Kinco HP043-20DT

HMI and PLC Combination
  • 65536 True Colors
  • LCD Lifetime up to 50,000 Hours
  • 480×272 Pixels
  • 4.3″ LCD Display Screen
  • HMI and PLC are attached
  • IP65 Protection Level on Front Panel
  • 24 VDC Input Voltage
  • Backlight LED
  • 128M Flash and 64M DDR2 Memory
  • Communication Ports: USB2.0, RS485

The KNC-HMI-HP043-20DT is a combination of a HMI and PLC that provides a reliable system to help your application run smoothly and efficiently. This HMI/PLC combination comes with a 65536 color display mode that enhances your touch screen with rich color and incomparable resolution. The front screen has a protection rating of IP65, it is protected against dust ingress, and it may be subjected to low pressure water jets. On the backside the PLC is professionally attached to the HMI. The PLC provides special I/O functions, a USB2.0 (Micro USB Connector) programming port, 4 high-speed counters, 3 high-speed outputs, a RS485 communication/serial port, integrated digital input and output channels, and more. The built in high-speed pulse outputs can reach a maximum frequency of 50 KHz. The free KincoBuilder software provides absolute and relative positioning, homing, jogging, and quick stop instructions for programming the PLC functions of this device. The HP Builder software is a convenient and powerful configuration software for the HMI/screen programming that allows the creation of first-class, efficient programs. KincoBuilder and HP Builder software are both required to operate this integrated device. The KNC-HMI-HP043-20DT series is the perfect choice for a quick, easy set-up and its combination of the HMI and PLC makes it a smart choice for our customers.


Kinco HMI-PLC combine HMI and PLC. It is Kinco ecomony integrated product.Based on powerful functions、high performance and high reliability, Kinco improve hardware designing of HMI-PLC. It cancel the wiring and communication of HMI and PLC, so it will reduce cost.Kinco HMI-PLC is integrated product with high price-performance ratio.


■ Features


• PLC and HMI integration, with mulitple I/O and analog , tiny space for installation, With highly cost-effective;

• USB Programming port;

• High-speed Counter;

• High-speed pulse output;

• Serial communication port;

• Touchable display terminal with powerful functions.



PLC and HMI integration, with mulitple I/O and analog , tiny space for installation, With highly cost-effective.

• 4.3” TFT touchable display terminal,Digital IO 9*DI/DO 9*transistor,Analog IO 2*AI,Dimension:132*102*40.1mm。

USB Programming port

• HMI-PLC provides MicroUSB port for programming(USB2.0)

High speed Counter

• HMI-PLC provides 4 high speed counters.All high speed counter can support maximum 32 PV and support 32 “CV=PV” interrupts.High speed counter supports multiple modes: single phase, CW/CCW,AB phase (1 multiplication and 4 multiplication). HSC0 and HSC1 can support up to 50KHz(Both single phase and AB phase).HSC2 and HSC3 can support up to 20KHz for single phase and 10 KHz for AB phase.

High speed  output

• 3 high-speed pulse output channels, respectively Q0.0 Q0.1 and Q0.4, all support PTO (pulse train) and PWM (pulse width modulation) mode output.Q0.0 and Q0.1 support maximum 50KHz, and Q0.4 supports maximum 10KHz.

Serial communication port

• CPU module provides 1 RS485 serial communication ports,PORT1 , baut rate up to 115.2k. PORT1 support Programming port、Modbus RTU master and slave、free protocol.

Touchable display terminal with powerful functions.

• 65536 color hd display, USB Host, support large capacity data storage, using Kinco HMI programming software, with rich functions.




NameOrder no.PLC Specification
Supply voltageDIDOAIAOHigh speed counterHigh speed outputPortExtension moduleDimensions(mm) (L*W*H)
HP043HP043-20DTDC 24V99*Transistor2*AI (0-10V)none 

single phase,2*Max 50KHz ,  2*Max 20KHz

Two phase,2*Max 50KHz ,  2*Max 10KHz

2*Max 50KHz

1*Max 10KHz


Max 115.2kbps

no expansion132*102*40.1
HP043-20DTC2cold junction internal

compensation or external compensation is optional,J type, K type, E type, S type


Max 115.2kbps

HP070HP070-33DT1614*Transistor2*IV1*IV2*Max 50KHz2*Max 50KHzup to 8204*150*38.55
HMI Specification
DisplayColorResolutionBacklightBrightnessTouch PanelBacklight lifeMemoryRecipe memoryExpandable memoryProgram download
4.3” TFT


480*272LED250cd/m²4-wire precision resistance network50000 hours128M Flash
+32M DDR
256KB1 USB Host1 USB
7” TFT800*480300cd/m²256KB+RTC