H3CA-A Rơ le thời gian hiển thị số Omron

414 lượt xem

Ngày: 17/06/2019

Hết Hàng

Thông tin sản phẩm

2,423,000

Hết hàng

Xin vui lòng liên hệ theo thông tin dưới dây

0816914999 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

H3CA-A

Rơ le thời gian hiển thị số Omron

DIN-sized (48 × 48, 45 × 75 mm) Timer with Digital Setting and LCD Display

• Dual power supplies for free AC/DC.

• Eight operation modes selectable with one unit.

• Any desired time can be set digitally within a range from 0.1 seconds to 9,990 hrs.

• Four external signal inputs.

• ON/OFF indicator for control output and bar indicator for remaining time.

• Conforms to UL, CSA, and CE marking.

Operation/
resetting system
Operation
mode
TerminalTime-
limit
contact
Instan-
taneous
contact
Mounting
Surface
mounting/
track mounting
Flush
mounting
Time-limit operation/
self-resetting/external
resetting *2
8 operation modes
(selectable) *3
11-pin round
socket
SPDTH3CA-AH3CA-A
Front screwH3CA-FA
Time-limit operation/
self-resetting
ON-delay operation8-pin round
socket
DPDTH3CA-8H3CA-8
SPDTSPDTH3CA-8HH3CA-8H
*1. Specify both the model number and supply voltage when ordering for the H3CA-8H and H3CA-8.
*2. The operation/resetting system depends on the selected operation mode. For details, see “Timing Chart”.
*3. The 8 operation modes are as follows:
A: ON-delay operation
B: Repeat cycle operation
C: Signal ON/OFF-delay operation (1)
D: Signal OFF-delay operation (1)
E: Interval operation
F: One-shot and flicker operation
G: Signal ON/OFF-delay operation (2)
H: Signal OFF-delay operation (2)

Accessories (Order Separately)

Name/specificationsModel
Flush mounting adapterY92F-30
Y92F-70
Y92F-71
Front coverY92A-48B
Y92A-48D
Front connecting socketP2CF-08
P2CF-11
Front connecting socket
Finger protection *1
P2CF-08-E
P2CF-11-E
Back connecting socketP3G-08
P3GA-11
Back connecting socket
Solder terminal
PL08
PL11
Terminal block cover for P3G-08/P3GA-11 *2Y92A-48G

*1. Round crimp terminals cannot be used with fingerprotection structure sockets. Use forked crimp terminals.
*2. A terminal cover (Y92A-48G) can be used with P3GA-11 and P3G-08 for finger protection.

NHẬN XÉT SẢN PHẨM