Rơ le chốt Omron G4Q-212S AC220

1.711 lượt xem

Ngày: 21/07/2016

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Đảm bảo 100% hàng chính hãng

Dịch vụ khách hàng tốt nhất

0936.296.483 (hotline)

0936.296.483 (Hỗ trợ kỹ thuật)

Rơ le chốt Omron G4Q-212S AC220

  • Nguồn cấp: 220VAC 50/60Hz
  • Ngõ ra: DPDT. 5A 250VAC (tải thuần trở); 3A 250VAC (tải điện cảm)
  • Tần số làm việc: 1.200 lần/giờ (ở tải định mức)
  • Tuổi thọ cơ: 5.000.000 lần tối thiểu (ở tần số hoạt động 1.200 lần/giờ)
  • Tuổi thọ điện: 500.000 lần tối thiểu (ở tần số hoạt động 1.200 lần/giờ, tải định mức)
  • Nhiệt độ làm việc: -10oC ~ 55oC
  • Mã đặt hàng: G4Q-212S AC220

Thông số kĩ thuật

Coil Ratings

Item Current (mA) Resistance
(Ω)
Must operate Must release Max. voltage Power consumption
Rated
voltage (V)
50 Hz 60 Hz % of rated voltage Initial Rated
AC 12 614 531 2.24 80 % max. 10 % min. 110 % max. Approx.
13.5 VA
Approx.
6.4 VA
24 307 266 8.7
50 148 128 42.7
100/
(110)
74 64/73.5 160
200/
(220)
37 32/36.8 671
Item Current (mA) Resistance
(Ω)
Must operate Must release Max. voltage Power consumption
Rated
voltage (V)
50 Hz 60 Hz % of rated voltage
DC 12 320 37.5 5 % min. Approx. 3.9 W
24 155 155
100 39 2,580
200 19.2 10,400
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%
for AC rated current and ±15% for DC coil resistance.
2. The AC coil resistance values are for reference only.
3. Performance characteristic data is measured at a coil temperature of 23°C.
4. The maximum voltage is one that is applicable instantaneously to the Relay coil at an ambient temperature of
23°C and not continuously.
5. The AC power consumption is measured at 60 Hz.

Contact Ratings

Load Resistive load
(cosΦ = 1)
Inductive load
(cosΦ = 0.4)
(L/R = 7 ms)
Contact mechanism Single
Contact material Silver alloy
Rated load 5 A at 220 VAC, 5 A at 24 VDC 3 A at 220 VAC, 4 A at 24 VDC
Rated carry current 5 A
Max. switching voltage 250 VAC, 250 VDC
Max. switching current 5 A

Characteristics

Contact resistance
(See note 2.)
50 mΩ max.
Operate time
(See note 3.)
60 ms max.
Max. operating frequency Mechanical: 1,200 operations/hr
Electrical: 1,200 operations/hr (under rated load)
Insulation resistance
(See note 4.)
100 MΩ min. (at 500 VDC)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between coil and contact (1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity) (2,000 VAC between contacts of different polarities)
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.5 mm single amplitude (1.0 mm double amplitude)
Shock resistance Destruction: 500 m/s2
Malfunction: 100 m/s2
Endurance Mechanical: 5,000,000 operations min. (at operating frequency of 1,200 operations/hr)
Electrical: 500,000 operations min. (under rated load and at operating frequency of 1,200 operations/hr) (See note 5.)
Error rate
(See note 6.)
1 A at 5 VDC (0.1 A at 5 VDC)
Ambient temperature Operating: -10°C to 55°C (with no icing or no condensation)
Ambient humidity Operating: 5% to 85%
Weight Open model: Approx. 240 g; cased model: Approx. 340 g
Note: 1. The data shown above are initial values.
2. The contact resistance was measured with 0.1 A at 5 VDC using the voltage drop method.
3. The operate time was measured with the rated voltage imposed with any contact bounce ignored at an ambient
temperature of 23°C.
4. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for
checking the dielectric strength.
5. The electrical endurance was measured at an ambient temperature of 23°C.
6. This value was measured at a switching frequency of 60 operations per minute. The value in parentheses is for
the cased model.

 

Để xem các loại rơ le Omron khác tại đây

Để tải tài liệu chính hãng Omron tại đây

NHẬN XÉT SẢN PHẨM