FX2N-232IF mô truyền giao diện RS232

FX2N-232IF mô truyền giao diện RS232

FX series supports networking according to control needs, including high speed network with CC-Link and CC-Link/LT for reduced wiring.
Also, easily constructed simple data link between FX series and communication with RS-232C and RS-485 devices are supported.

CC-Link

Model		Master station function	Remote/slave function	Distance	Applicable FX PLC
					FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-16CCL-M*1 CC-Link master block (Master station)	○	×	1,200 m maximum	×	○ Max. 1 unit	*4 ○ Max. 1 unit	*2 ○ Max. 1 unit	*2 *3 ○ Max. 1 unit
	FX2N-32CCL CC-Link Interface block (Remote device station)	×	○	1,200 m maximum	×	○	○	*2 ○	*2 ○
	FX3U-64CCL CC-Link Interface block (Intelligent device station)	×	○	1,200 m maximum	×	○ Max. 1 unit	○ Max. 1 unit	*2 ○ Max. 1 unit	*2 *3 ○ Max. 1 unit

*1: The FX3U-16CCL-M, FX2N-16CCL-M cannot be used at the same time with the FX2N-32ASI-M.
The FX3U-16CCL-M cannot be used at the same time with the FX2N-16CCL-M.
FX3U-16CCL-M and FX2N-16CCL-M cannot be used together.
[Remote I/O station]
Maximum 8 stations can be connected (1 station occupies 32 I/O points of the PLC)
[Total of remote device stations + intelligent device stations]
Maximum 8 stations can be connected (However, the total number of RX/RY points is 256 or less)

*2: When connecting to FX3GC，FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*3: FX3UC supported from version 2.20 or later.
*4: FX3U supported from version 2.20 or later.

CC-Link/LT

Model		Master station function	Remote/slave function	Applicable FX PLC
				FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX2N-64CL-M CC-Link/LT master block	○	×	×	○ Max. 8 units	○ Max. 8 units	*1 ○ Max. 5 units	*1 ○ Max. 5 units
	FX3UC-32MT-LT Built-in CC-Link/LT master	○	×	–	–	–	–	–
	FX3UC-32MT-LT-2 Built-in CC-Link/LT master	○	×	–	–	–	–	–

*1: When connecting to FX3GC，FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

CC-Link/LT: Power Adapter・Dedicated Power Supply

Model		Applicable FX PLC
		FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	CL1PAD1 Power Adapter	×	○	○	○	○
CL1PSU-2A Dedicated Power Supply		×	○	○	○	○

Ethernet

Model		Applicable FX PLC
		FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-ENET-L	×	×	*1 ○ Max. 1 unit	×	*1 *2 ○ Max. 1 unit
	FX3U-ENET-ADP	*7 *8 ○ Max. 1 unit	*3 *5 ○ Max. 1 unit	*4 *6 ○ Max. 1 unit	*3 ○ Max. 1 unit	*4 *6 ○ Max. 1 unit

*1: FX3U，FX3UC supported from version 2.21 or later.
*2: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*3: FX3G, FX3GC supported from version 2.20 or later.
*4: FX3U, FX3UC supported from version 3.10 or later.
*5: When connecting to FX3G, FX3G-CNV-ADP is required.
*6: When connecting to FX3U or FX3UC-32MT-LT(-2), a function expansion board is required.
*7: When connecting to FX3S, FX3S-CNV-ADP is required.
*8: When connecting to FX3S, supported by FX3U-ENET-ADP Ver.1.20 or later.

MODBUS

Model		Applicable FX PLC
		FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-232ADP-MB Special adapter for RS-232C communication	*7 ○ Max. 1 unit	*1 *2 *3 ○ Max. 2 units	*4 *5 ○ Max. 2 units	*6 ○ Max. 2 units	*4 *5 ○ Max. 2 units
	FX3U-485ADP-MB Special adapter for RS-485 communication	*7 ○ Max. 1 unit	*1 *2 *3 ○ Max. 2 units	*4 *5 ○ Max. 2 units	*6 ○ Max. 2 units	*4 *5 ○ Max. 2 units

*1: FX3G 14pt, 24pt models: 1 unit. 40pt, 60pt models: 2 units.
*2: When connecting to FX3G, FX3G-CNV-ADP is required.
*3: FX3G supported from version 1.30 or later.
*4: When connecting to FX3U，FX3UC-32MT-LT(-2), Function expansion board is required.
*5: FX3U, FX3UC supported from version 2.40 or later.
*6: FX3GC supported from version 1.40 or later.
*7: When connecting to FX3S, FX3S-CNV-ADP is required.

Sensor Solution

Model		Applicable FX PLC
		FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-128BTY-M AnyWire Bitty series master block	×	*1 ○ Max. 1 unit	*3 ○ Max. 1 unit	*2 *4 ○ Max. 1 unit	*3 *4 ○ Max. 1 unit
	FX3U-128ASL-M AnyWireASLINK system special adapter	×	*1 ○ Max. 1 unit	*3 ○ Max. 1 unit	*2 *4 ○ Max. 1 unit	*3 *4 ○ Max. 1 unit

*1: FX3G supported from version 1.00 or later.
*2: FX3GC supported from version 1.40 or later.
*3: FX3U, FX3UC supported from version 2.20 or later.
*4: When connecting to FX3GC, FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

RS-232C communication

Model		Communication Function					Applicable FX PLC
		N:N network	Parallel Link	Computer Link	Non-Protocol Communication	Peripheral device communication	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3G-232-BD Function expansion board for RS-232C communication	×	×	○	○	○	*10 ○ Max. 1 unit	*1 ○ Max. 2 units	×	×	×
	FX3U-232-BD Function expansion board for RS-232C communication						×	×	○ Max. 1 unit	×	*2 ○ Max. 1 unit
	FX3U-232ADP-MB Specific adapter for RS-232C communication	×	×	○	○	○	*11 ○ Max. 1 unit	*1 *3 *7 ○ Max. 2 units	*4 *8 ○ Max. 2 units	*9 ○ Max. 2 units	*4 *8 ○ Max. 2 units
	FX2N-232IF Special block for RS-232C communication	×	×	×	○	×	×	×	○ Max. 8 units	×	*5 *6 ○ Max. 8 units

*1: FX3G 14pt, 24pt models: 1 unit. 40pt, 60pt models: 2 units.
*2: Can only be connected to FX3UC-32MT-LT(-2).
*3: When connecting to FX3G, FX3G-CNV-ADP is required.
*4: When connecting to FX3U，FX3UC-32MT-LT(-2), Function expansion board is required.
*5: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*6: For FX3UC-32MT-LT(-2), 7 units. For FX3UC-**MT/D, FX3UC-**MT/DSS, and FX3UC-16MR/D(S)-T, 8 units.
*7: FX3GC supported from version 1.30 or later.
*8: FX3U, FX3UC supported from version 2.40 or later.
*9: FX3GC supported from version 1.40 or later.
*10: Function expansion board and FX3S-CNV-ADP cannot be used together.
*11: When connecting to FX3S, FX3S-CNV-ADP is required.

RS-485 communication

Model		Communication Function					Applicable FX PLC
		N:N network	Parallel Link	Computer Link	Non-Protocol Communication	Peripheral device communication	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3G-485-BD Function expansion board for RS-485 communication	○	○	○	○	×	*8 ○ Max. 1 unit	*1 ○ Max. 2 units	×	×	×
	FX3G-485-BD-RJ Function expansion board for RS-485 communication (RJ-45 connector type)						*8 ○ Max. 1 unit	*1 ○ Max. 2 unit	×	×	×
	FX3U-485-BD Function expansion board for RS-485 communication						×	×	○ Max. 1 unit	×	*2 ○ Max. 1 unit
	FX3U-485ADP-MB Specific adapter for RS-485 communication	○	○	○	○	×	*9 ○ Max. 1 unit	*1 *3 *5 ○ Max. 2 units	*4 *6 ○ Max. 2 units	*7 ○ Max. 2 units	*4 *6 ○ Max. 2 units
	FX-485PC-IF-SETRS-232C/RS-485 converter interface	×	×	○	×	×	○	○	○	○	○

*1: FX3G 14pt, 24pt models: 1 unit. 40pt, 60pt models: 2 units.
*2: Can only be connected to FX3UC-32MT-LT(-2).
*3: When connecting to FX3G, FX3G-CNV-ADP is required.
*4: When connecting to FX3U，FX3UC-32MT-LT(-2), Function expansion board is required.
*5: FX3G supported from version 1.30 or later.
*6: FX3U, FX3UC supported from version 2.40 or later.
*7: FX3GC supported from version 1.40 or later.
*8: Function expansion board and FX3S-CNV-ADP cannot be used together.
*9: When connecting to FX3S, FX3S-CNV-ADP is required.

RS-422 communication

Model		Communication Function					Applicable FX PLC
		N:N network	Parallel Link	Computer Link	Non-Protocol Communication	Peripheral device communication	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3G-422-BD Function expansion board for RS-422 communication	×	×	×	×	○	*3 ○ Max. 1 unit	*1 ○ Max. 2 units	×	×	×
	FX3U-422-BD Function expansion board for RS-422 communication						×	×	○ Max. 1 unit	×	*2 ○ Max. 1 unit

*1: FX3G 14pt, 24pt models: 1 unit. 40pt, 60pt models: 2 units.
*2: Can only be connected to FX3UC-32MT-LT(-2).
*3: Function expansion board and FX3S-CNV-ADP cannot be used together.

USB communication

Model		Communication Function					Applicable FX PLC
		N:N network	Parallel Link	Computer Link	Non-Protocol Communication	Peripheral device communication	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-USB-BD Function expansion board for USB communication	×	×	×	×	○	×	×	○ Max. 1 unit	×	* ○ Max. 1 unit

*: Can only be connected to FX3UC-32MT-LT(-2).

Communication function for function expansion memory (Inverter operation control)

Model		Communication Function					Applicable FX PLC
		N:N network	Parallel Link	Computer Link	Non-Protocol Communication	Peripheral device communication	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX2N-ROM-E1 Function expansion memory cassette	–	–	–	–	–	×	×	×	×	×
	FX2NC-ROM-CE1 Function expansion memory board						×	×	×	×	×

Communication function

CC-Link

CC-Link is an open network enabling connection of various FA equipment.
We prepare a master unit setting FX PLC as master blocks of CC-Link, as well as an interface setting them as remote device stations of CC-Link.

Details

CC-Link/LT

CC-Link/LT is an open network in the open network CC-Link family designed to reduce wiring in the cabinet and the machine.
Also, FX3UC-32MT-LT(-2) has CC-Link/LT master functionality built-in, so reduced wiring network can be easily achieved.

Details

N:N network

This network connects multiple FX PLCs (maximum 8 units) and performs automatic data exchange between each PLC. Linked devices are exchanged between each PLC, and all connected PLCs can share (monitor) linked devices.

Details

Parallel Link

Bit devices (M) and word devices (D) automatically refresh.

Details

Computer Link

A computer as master can connect to FX series as slave.
Supports “computer link protocol formats 1 and 4” on the computer side.

Details

Non-Protocol Communication

Non-proocol serial communication is possible to devices with RS-232C or RS-485 (422) communication interface (PC, barcode reader, etc).

Details

Peripheral device communication

PC, GOT, and HPP can connect to RS-232C/RS-422/USB (USB can be used by PC only) and perform PLC program transfer and monitoring.

Details

inverter communication

Mitsubishi inverter prococol and dedicated instructions for communication control are built into FX3 series PLC. Mitsubishi inverters can be easily controlled just by adding an RS-485 communication device.

Details