F3SJ-E0785N25 Cảm biến màn an toàn Omron

306 lượt xem

Ngày: 15/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Xin vui lòng liên hệ theo thông tin dưới dây

0816914999 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

F3SJ-E0785N25 Cảm biến màn an toàn Omron

Three versions available to meet your exact safety needs. All versions conform to the latest PLe/Safety Category 4 and SIL3 requirements.

F3SJ-E

Main Units

Safety Light Curtain

ApplicationDetection
capability
Beam gapOperating rangeProtective height
(mm)
Model
PNP outputNPN output
Hand protectionDia. 25 mm20 mm0.2 to 7 m185 to 1,105F3SJ-E[][][][]P25 *F3SJ-E[][][][]N25
Note: F3SJ-E uses a 3 m prewired discrete cable.
*1. For S-mark compatible model, the suffix “-S” is added to the model name.
(Example) F3SJ-E0185P25-S

Safety Light Curtain Model List

Please contact our sales representative.

F3SJ-E Series (20 mm pitch)

ModelNumber of beamsProtective height [mm] *2
PNP output *1NPN output
F3SJ-E0185P25F3SJ-E0185N258185
F3SJ-E0225P25F3SJ-E0225N2510225
F3SJ-E0305P25F3SJ-E0305N2514305
F3SJ-E0385P25F3SJ-E0385N2518385
F3SJ-E0465P25F3SJ-E0465N2522465
F3SJ-E0545P25F3SJ-E0545N2526545
F3SJ-E0625P25F3SJ-E0625N2530625
F3SJ-E0705P25F3SJ-E0705N2534705
F3SJ-E0785P25F3SJ-E0785N2538785
F3SJ-E0865P25F3SJ-E0865N2542865
F3SJ-E0945P25F3SJ-E0945N2546945
F3SJ-E1025P25F3SJ-E1025N25501,025
F3SJ-E1105P25F3SJ-E1105N25541,105
*1. For S-mark compatible model, the suffix “-S” is added to the model name.
(Example) F3SJ-E0185P25-S
*2. Protective height (mm) = Total sensor length

Accessories (Sold separately)

Relays with Forcibly Guided Contacts

TypeAppearanceSpecificationsModelRemarks
G7SA Relays with
Forcibly Guided Contacts
f3sj-e_lu_3_1
Nodes: 4
Contact type: 2A2B
Rated switch load:
250 VAC 6A, 30 VDC 6A
G7SA-2A2BFor details on other models or socket models,
refer to the OMRON’s website.
Nodes: 4
Contact type: 3NO+1NC
Rated switch load:
250 VAC 6A, 30 VDC 6A
G7SA-3A1B
G7S-[]-E Relays with
Forcibly Guided Contacts
f3sj-e_lu_3_2
Nodes: 6
Contact type: 4NO+2NC
Rated switch load:
250 VAC 10 A, 30 VDC 10 A
G7S-4A2B-EFor details on other models or socket models,
refer to the OMRON’s website.
Nodes: 6
Contact type: 3NO+3NC
Rated switch load:
250 VAC 10 A, 30 VDC 10 A
G7S-3A3B-E

Laser Pointer

AppearanceOutputModel
f3sj-e_lu_4_1
Laser Pointer for F3SJF39-PTJ

Spatter Protection Cover (2 covers per set, one for emitter and one for receiver) (10% Operating Range Attenuation)

AppearanceModel
f3sj-e_lu_5_1
F39-HB[][][][] *
* The same 4-digit numbers as the protective heights ([][][][] in the light curtain model names) are substituted by in the
model names.

Protective Bar

AppearanceModelRemarks
f3sj-e_lu_6_1
F39-PB[][][][] *12 Light Curtain brackets
4 mounting brackets
0 to 4 intermediate brackets for backside mounting (quantity required for the sensing width)
0 to 4 intermediate brackets for mounting to the sides (quantity required for the sensing width)
F39-PB[][][][]-S *1 *21 Light Curtain bracket
2 mounting brackets
0 to 2 intermediate brackets for backside mounting (quantity required for the sensing width)
0 to 2 intermediate brackets for mounting to the sides (quantity required for the sensing width)
Note: The following are not provided with the Protective Bars.
• Safety Light Curtain
• Safety Light Curtain Top/Bottom Brackets
• Wall Mounting Screw Unit
*1. The same four digits indicating protective height that are used in the Sensor model number ([][][][]) are used in the
part of the Protector model number.
*2. Purchase the F39-PB[][][][] (which contains two sets of brackets) to use Protective Bars for both the Emitter and
Receiver.

Test rod (Sold separately)

DiameterModel
14mm dia.F39-TRD14
20mm dia.F39-TRD20
25mm dia.F39-TRD25
30mm dia.F39-TRD30

Mirrors (12% Operating Range Attenuation)

AppearanceMirror materialWidth
(mm)
Thickness
(mm)
Length L
(mm)
ModelRemarks
f3sj-e_lu_7_1Glass mirror14532445F39-MLG04062 sets of
cylinder
mounting
brackets and
4 screws are
included.
648F39-MLG0610
749F39-MLG0711
953F39-MLG0914
1,105F39-MLG1067
1,257F39-MLG1219
1,499F39-MLG1422
1,702F39-MLG1626
1,905F39-MLG1830
2,210F39-MLG2134

Sensor Mounting Bracket (Sold separately)

AppearanceSpecificationsModelApplicationRemarks
f3sj-e_lu_8_1Top/bottom
bracket
F39-LJB1Top/bottom bracket for F3SJ-E/B2 for an emitter,
2 for a receiver,
total of 4 per set
f3sj-e_lu_8_2Intermediate
bracket
F39-LJB2 *1 *2In combination use with top/bottom
bracket for F3SJ-E/B Can be used
as free-location bracket.
1 set with 2 pieces
f3sj-e_lu_8_3One-touch
bracket
F39-LJB3-M6 *1One-touch bracket for F3SJ-E/B
Supports M6 slide nut for aluminum
frame.
1 set with 2 pieces
F39-LJB3-M8 *2One-touch bracket for F3SJ-E/B
Supports M8 slide nut for aluminum
frame.
f3sj-e_lu_8_4One-touch M6
bracket
One-touch M8
bracket
F39-LJB3-M6K *1Bracket to mount an intermediate
bracket to the aluminum frame
with a single touch.
Hexagon socket head
cap screws (M6 x 10)
are included.
F39-LJB3-M8K *2Hexagon socket head
cap screws (M8 x 14)
are included.
f3sj-e_lu_8_5Compatible
mounting bracket
F39-LJB4Mounting bracket used when
replacing existing area sensors
(F3SJ-A or F3SN) with the
F3SJ-E/B.
2 for an emitter,
2 for a receiver,
total of 4 per set
f3sj-e_lu_8_6Contact mount
bracket
F39-LJB5Bracket to closely contact the back
side of the Sensor.
2 for an emitter,
2 for a receiver,
total of 4 per set
Note: All the sensor mounting brackets for F3SJ-E are sold separately.
*1. Combining F39-LJB2 and F39-LJB3-M6K makes F39-LJB3-M6.
*2. Combining F39-LJB2 and F39-LJB3-M8K makes F39-LJB3-M8.
NHẬN XÉT SẢN PHẨM