EE-SX474 Omron Cảm biến quang siêu nhỏ

105 lượt xem

Ngày: 17/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Chuyên mục: , .

Đảm bảo 100% hàng chính hãng

Dịch vụ khách hàng tốt nhất

0936.296.483 (hotline)

0936.296.483 (Hỗ trợ kỹ thuật)

EE-SX474 Omron Cảm biến quang siêu nhỏ

Connector

Appearance Sensing
method
Connecting
method
Sensing
distance
Output
configuration
Indicator
mode
Model
NPN output PNP output
Standard
Through-
beam
type
(with slot)
Connector
(4 poles)
5 mm
(slot
width)
(Infrared
light)
Dark-ON/
Light-ON
(selectable)
*3 *4
Incident light EE-SX670 EE-SX670P
No incident
light
EE-SX670A EE-SX670R
Light-ON Incident light EE-SX470
L-shaped
Dark-ON/
Light-ON
(selectable)
*3 *4
Incident light EE-SX671 EE-SX671P
No incident
light
EE-SX671A EE-SX671R
Light-ON Incident light EE-SX471
T-shaped,
slot
center
7 mm
Dark-ON/
Light-ON
(selectable)
*3 *4
Incident light EE-SX672 EE-SX672P
No incident
light
EE-SX672A EE-SX672R
Light-ON Incident light EE-SX472
Close-
mounting
Dark-ON/
Light-ON
(selectable)
*3 *4
Incident light EE-SX673 EE-SX673P
No incident
light
EE-SX673A EE-SX673R
Light-ON Incident light EE-SX473
Close-
mounting
Dark-ON/
Light-ON
(selectable)
*3 *4
Incident light EE-SX674 EE-SX674P
No incident
light
EE-SX674A EE-SX674R
Light-ON Incident light EE-SX474
T-shaped,
slot
center
10 mm
Dark-ON/
Light-ON
(selectable)
*3 *4
Incident light EE-SX675 EE-SX675P
F-shaped
Dark-ON/
Light-ON
(selectable)
*3 *4
Incident light EE-SX676 EE-SX676P
R-shaped
Dark-ON/
Light-ON
(selectable)
*3 *4
Incident light EE-SX677 EE-SX677P

*3. Dark-ON when the L terminal of the connector is opened, and light-ON when the L terminal and positive (+) terminal are connected. Do not connect the L terminal to 0 V when using dark-ON operation. When using light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are connected in advance.
*4. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from coming in contact with other terminals.

NHẬN XÉT SẢN PHẨM