E6F-CWZ5G 1000P/R Encoder Omron

302 lượt xem

Ngày: 12/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Chuyên mục: .
Xin vui lòng liên hệ theo thông tin dưới dây

0816914999 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

E6F-CWZ5G 1000P/R Encoder Omron

Rugged Rotary Encoder

• Incremental model

• External diameter of 60 mm.

• Resolution of up to 1000 ppr.

• IP65 oil-resistance with strong shaft.

Radial: 120 N, Thrust: 50 N

Encoders

Power supply voltageOutput configurationResolution (pulses/rotation)Model
12 to 24 VDCComplementary output100, 200, 360, 500, 600E6F-CWZ5G (resolution) 2M
Example: E6F-CWZ5G (100P/R) 2M
1,000
NPN open-collector output1,000E6F-CWZ5C (1000P/R) 2M

Accessories (Order Separately)

NameModelRemarks
CouplingsE69-C10B
E69-C610BDifferent end diameter
E69-C10MMetal construction
Servo Mounting BracketE69-2(Three brackets in a set.)
ModelE6F-CWZ5GE6F-CWZ5C
Power supply voltage12 VDC -10% to 24 VDC +15%, ripple (p-p): 5% max.
Current consumption *1100 mA max.
Resolution
(pulses/rotation)
100, 200, 360, 500, 600, 1,0001,000
Output configurationComplementary outputs *2NPN open-collector output
Output capacityOutput voltage:
VH = Vcc -3 V min. (Io = 30 mA),
VL = 2 V max. (Io = -30 mA)
Output current: ±30 mA
Applied voltage: 30 VDC max.
Sink current: 35 mA max.
Residual voltage: 0.4 V max.
(at sink current of 35 mA)
Maximum response
frequency
83 kHz
Phase difference between
outputs
90°± 45° between A and B (1/4 T ± 1/8 T)
Rise and fall times of
output
1 μs max. (Cable length: 2 m, Output
current: 30 mA)
1 μs max. (Cable length: 2 m, Control
output voltage: 5 V, Load resistance: 1 kΩ)
Starting torque10 mNm max. at room temperature, 15 mNm max. at low temperature
Moment of inertia3 ×10-6 kgm2 max.; 1.5 × 10-6 kgm2 max. at 600 P/R max.
Shaft loadingRadial120 N
Thrust50 N
Maximum permissible speed5,000 r/min
Protection circuitsPower supply reverse polarity protection, Output load short-circuit protection
Ambient temperature rangeOperating: -10 to 70°C (with no icing), Storage: -25 to 85°C (with no icing)
Ambient humidity rangeOperating/Storage: 35% to 85% (with no condensation)
Insulation resistance20 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistanceDestruction: 10 to 500 Hz, 150 m/s2 or 2-mm double amplitude for 11 min 3 times each
in X, Y, and Z directions
Shock resistanceDestruction: 1,000 m/s2 3 times each in X, Y, and Z directions
Degree of protectionIEC 60529 IP65, in-house standards: oilproof
Connection methodPre-wired Models (Standard cable length: 2 m)
MaterialCase: Zinc alloy, Main unit: Aluminum, Shaft: SUS420J2
Weight (packed state)Approx. 400 g
AccessoriesInstruction manual
Note: Coupling, mounting bracket and hex-head spanner are sold separately.
*1. An inrush current of approximately 9 A will flow for approximately 5 μs when the power is turned ON.
*2. Complementary Outputs
The complementary output has two output transistors (NPN and PNP) as shown at the right. These two output
transistors alternately turn ON and OFF depending on the high or low output signal. When using them, pull up to the
positive power supply voltage level or pull down to 0 V. The complementary output allows flow-in or flow-out of the
output current and thus the rising and falling speeds of signals are fast. This allows a long cable distance. They can
be connected to open-collector input devices (NPN, PNP).
E6F-C Specifications 2
NHẬN XÉT SẢN PHẨM