E6CP-AG5C 256P/R Encoder tuyệt đối Omron

474 lượt xem

Ngày: 15/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Chuyên mục: .
Xin vui lòng liên hệ theo thông tin dưới dây

0816914999 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

E6CP-AG5C 256P/R Encoder tuyệt đối Omron

General-purpose Absolute Encoder with External Diameter of 50 mm

• Absolute model.

• External diameter of 50 mm.

• Resolution: 256 (8-bit).

• Lightweight construction using plastic body.

Encoders

Power supply voltageOutput configurationResolution
(divisions)
Connector for H8PS Cam
Positioner
Model
5 to 12 VDCOpen-collector output256 (8-bit)NoneE6CP-AG3C 256P/R 2M
12 to 24 VDCE6CP-AG5C 256P/R 2M
SupportedE6CP-AG5C-C 256P/R 2M
Note: When connecting to the H8PS, use the E6CP-AG5C-C, which is connected using a connector. It cannot be used on
other models.

Accessories (Order Separately)

NameModelRemarks
CouplingsE69-C06BProvided with the E6CP-AG3C and E6CP-AG5C.
E69-C68BDifferent end diameter
E69-C610BDifferent end diameter
E69-C06MMetal construction
Servo Mounting BracketE69-2Provided with the product. (Three brackets in a set.)
Extension CableE69-DF55 mModels are also available with 15-m and 98-m cables.
E69-DF1010 m
E69-DF2020 m
ModelE6CP-AG3CE6CP-AG5CE6CP-AG5C-C
Power supply voltage5 VDC -5% to 12 VDC +10%,
ripple (p-p): 5% max.
12 VDC -10% to 24 VDC +15%, ripple (p-p): 5% max.
Current consumption *190 mA max.70 mA max.
Resolution (rotations)256 (8-bit)
Output codeGray code
Output configurationOpen-collector output
Output capacityApplied voltage: 28 VDC max.
Sink current: 16 mA max.
Residual voltage: 0.4 V max. (at sink current of 16 mA)
Maximum response
frequency *2
5 kHz
LogicNegative logic (high = 0, low = 1)
Accuracy±1° max.
Direction of rotationOutput code incremented by CW (as viewed from the end of the shaft)
Rise and fall times of
output
1 μs max. (Control output voltage: 16 V, Load resistance: 1 kΩ, Output cable: 2 m max.)
Starting torque0.98 mN·m max.
Moment of inertia1 × 10-6kg·m2 max.
Shaft
loading
Radial29.4 N
Thrust19.6 N
Maximum permissible speed1,000 r/min
Ambient temperature rangeOperating: -10 to 55°C (with no icing), Storage: -25 to 85°C (with no icing)
Ambient humidity rangeOperating/Storage: 35% to 85% (with no condensation)
Insulation resistance200 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistanceDestruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z
directions
Shock resistanceDestruction: 1,000 m/s2 3 times each in X, Y, and Z directions
Degree of protection*3IEC 60529 IP50
Connection methodPre-wired Models (Standard cable length: 2 m)Connector Models (Standard
cable length: 2 m)
MaterialCase: ABS, Main unit: PPS, Shaft: SUS416, Mounting Bracket: Galvanized iron
Weight (packed state)Approx. 200 g
AccessoriesCoupling (excluding Connector Models), Servo Mounting Bracket,
Hexagonal wrench (excluding Connector Models), Instruction manual
*1. An inrush current of approximately 8 A will flow for approximately 0.3 ms when the power is turned ON.
*2. The maximum electrical response speed is determined by the resolution and maximum response frequency as
follows:
E6CP-A Specifications 2
        This means that the Rotary Encoder will not operate electrically if its speed exceeds the maximum electrical
response speed.
*3. No protection is provided against water or oil.
NHẬN XÉT SẢN PHẨM