E6C2-CWZ6C 360P/R Encoder Omron

415 lượt xem

Ngày: 14/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Chuyên mục: .
Xin vui lòng liên hệ theo thông tin dưới dây

0816914999 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

E6C2-CWZ6C 360P/R Encoder Omron

General-purpose Encoder with External Diameter of 50 mm

• Incremental model

• External diameter of 50 mm.

• Resolution of up to 2,000 ppr.

• IP64 (improved oil-proof construction with sealed bearings)

• Side or back connections are possible. Pre-wired Models with cable connected at an angle.

Encoders

Power supply
voltage
Output
configuration
Resolution (pulses/rotation)Model
5 to 24 VDCOpen-collector
output (NPN)
10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600E6C2-CWZ6C (resolution) 2M
Example: E6C2-CWZ6C 10P/R 2M
720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000
12 to 24 VDCOpen-collector
output (PNP)
100, 200, 360, 500, 600E6C2-CWZ5B (resolution) 2M
Example: E6C2-CWZ5B 100P/R 2M
1,000, 2,000
5 to 12 VDCVoltage output10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600E6C2-CWZ3E (resolution) 2M
Example: E6C2-CWZ3E 10P/R 2M
720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000
5 VDCLine-driver output10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400, 500, 600E6C2-CWZ1X (resolution) 2M
Example: E6C2-CWZ1X 10P/R 2M
720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000

Accessories (Order Separately)

NameModelRemarks
CouplingsE69-C06B
E69-C68BDifferent end diameter
E69-C610BDifferent end diameter
E69-C06MMetal construction
FlangesE69-FCA
E69-FCA02E69-2 Servo Mounting Bracket provided.
Servo Mounting BracketE69-2Provided with E69-FCA02 Flange.
ModelE6C2-CWZ6CE6C2-CWZ5BE6C2-CWZ3EE6C2-CWZ1X
Power supply voltage5 VDC -5% to
24 VDC +15%,
ripple (p-p): 5% max.
12 VDC -10% to
24 VDC +15%,
ripple (p-p): 5% max.
5 VDC -5% to
12 VDC +10%,
ripple (p-p): 5% max.
5 VDC ±5%,
ripple (p-p): 5% max.
Current
consumption *1
80 mA max.100 mA max.160 mA max.
Resolution
(pulses/rotation)
10, 20, 30, 40, 50, 60,
100, 200, 300, 360,
400, 500, 600, 720,
800, 1,000, 1,024,
1,200, 1,500, 1,800,
2,000
100, 200, 360, 500,
600, 1,000, 2,000
10, 20, 30, 40, 50, 60, 100, 200, 300, 360, 400,
500, 600, 720, 800, 1,000, 1,024, 1,200, 1,500,
1,800, 2,000
Output phasesPhases A, B, and Z488_sp_1_1
Output configurationNPN open-collector
output
PNP open-collector
output
Voltage output (NPN
output)
Line driver output *2
Output capacityApplied voltage: 30
VDC max.
Sink current: 35 mA
max.
Residual voltage: 0.4
V max.
(at sink current of 35
mA)
Applied voltage: 30
VDC max.
Source current: 35
mA max.
Residual voltage: 0.4
V max.
(at source current of
35 mA)
Output resistance: 2

Output current: 20 mA
max.
Residual voltage: 0.4 V
max.
(at sink current of 20
mA)
AM26LS31 equivalent
Output voltage:
High level: Io = -20 mA
Low level: Is = 20 mA
Output voltage:
Vo = 2.5 V min.
Vs = 0.5 V max.
Maximum response
frequency *3
100 kHz50 kHz100 kHz
Phase difference
between outputs
90°±45° between A and B (1/4 T ± 1/8 T)
Rise and fall times
of output
1 μs max.
(Control output
voltage: 5 V,
Load resistance: 1 kΩ,
Cable length: 2 m)
1 μs max.
(Cable length: 2 m, Sink current: 10 mA)
0.1 μs max.
(Cable length: 2 m,
Io = -20 mA, Is = 20
mA)
Starting torque10 mNm max.
Moment of inertia1×10-6 kgm2 max.; 3 × 10-7 kgm2 max. at 600 P/R max.
Shaft
loading
Radial50 N
Thrust30 N
Maximum
permissible speed
6,000 r/min
Protection circuitsPower supply reverse polarity protection, Load short-circuit protection
Ambient temperature
range
Operating: -10 to 70°C (with no icing), Storage: -25 to 85°C (with no icing)
Ambient humidity
range
Operating/Storage: 35% to 85% (with no condensation)
Insulation resistance100 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistanceDestruction: 10 to 500 Hz, 150 m/s2 or 2-mm double amplitude for 11 min 3 times each in X, Y,
and Z directions
Shock resistanceDestruction: 1,000 m/s2 3 times each in X, Y, and Z directions
Degree of protectionIEC 60529 IP64, in-house standards: oilproof
Connection methodPre-wired Models (Standard cable length: 2 m)
MaterialCase: Zinc alloy, Main unit: Aluminum, Shaft: SUS420J2
Weight (packed
state)
Approx. 400 g
AccessoriesInstruction manual
Note: Coupling, mounting bracket and hex-head spanner are sold separately.
Note: Origin Indication
The following illustration shows the relationship between phase Z and the origin. Set cut face D to the phase Z
origin as shown in the illustration.
E6C2-C Specifications 2
*1. An inrush current of approximately 9 A will flow for approximately 0.3 ms when the power is turned ON.
*2. The line driver output is a data transmission circuit compatible with RS-422A and long-distance transmission is
possible with a twisted-pair cable.(AM26LS31 equivalent)
*3. The maximum electrical response speed is determined by the resolution and maximum response frequency as
follows:
E6C2-C Specifications 3
        This means that the E6C2-C Rotary Encoder will not operate electrically if its speed exceeds the maximum electrical
response speed.
NHẬN XÉT SẢN PHẨM