E5AC-QX3ASM-800 Điều khiển nhiệt độ Omron

1.535 lượt xem

Ngày: 21/06/2016

Tình trạng : Còn Hàng

Thông tin sản phẩm


Chuyên mục: .
Xin vui lòng liên hệ theo thông tin dưới dây

0816914999 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)


Bộ điều khiển nhiệt E5AC, kích thước 96 x 96mm, ngõ ra SSR (12VDC)

  • Nguồn cấp: 100 to 240 VAC, 50/60 Hz (85% – 110% điện áp định mức)
  • Hiển thị:
PV hiển thị màu trắng dễ đọc.
Hiển thị 3 dòng: PV/SV/MV, PV/SV/Multi-SP, or PV/SV/Remaining soak time
Chiều cao: PV: 25.0 mm, SV: 15.0 mm, MV: 9.5 mm
Hiển thị 4 số cho PV, SV, và MV
  • Ngõ vào:
– Thermocouple: K, J, T, E, L, U, N, R, S, B, W, PL II
– Platinum resistance thermometer: Pt100, JPt100
– Infrared temperature sensor: 10 ~ 70°C, 60 ~ 120°C, 115 ~ 165°C, 140 ~ 260°C
– Current input: 4 ~ 20 mA hoặc 0 ~ 20 mA
– Voltage input: 1 ~ 5 V, 0 ~ 5 V, 0 ~ 10 V
  • Tốc độ lấy mẫu ngõ vào: 50 ms
  • Ngõ ra điều khiển 1: Rơ-le
  • Ngõ ra điều khiển 2: Không
  • Ngõ ra alarm: 3 ngõ ra NO, 2A ở 250VAC (tải thuần trở)
  • Ngõ ra Transfer: Không
  • Chức năng điều khiển: ON/OFF control hoặc 2-PID control (with auto-tuning)
  • Chức năng khác: Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout (HB) alarm (including SSR failure (HS) alarm), 40% AT, 100% AT, MV limiter, input digital filter, self tuning, robust tuning, PV input shift, run/stop, protection functions, extraction of square root, MV change rate limit, simple calculations, temperature status display, simple programming, moving average of input value, and display brightness setting.
  • Nhiệt độ làm việc: -10 ~ 55°C (with no condensation or icing)
  • Tiêu chuẩn: UL 61010-1, CSA C22.2 No. 611010-1 (evaluated by UL); EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II

>> Tải ngay tài liệu và ứng dụng E5AC-QX3ASM-800 để tra cứu chi tiết

Đặc điểm sản phẩm

he New E5CC, E5CC-U, E5EC, E5AC, and E5DC Next-generation Digital Controllers with Advanced Designs and Easy Operation

White PV display and new LCD with greatly improved visibility.*
* 100 times higher contrast ratio than the E5[]Z.

E5AC-800 Features 1

A compact body with large display characters for easy reading even from a distance.
This helps to reduce human error.

E5AC-800 Features 3

The white LCD display is easy to read in the subdued lighting conditions.

E5AC-800 Features 4

The display remains easy to read even from wide viewing angles.

Save space!

E5AC-800 Features 5

The compact and space-saving design of the new E5CC/E5EC/E5AC controller generation requires less space behind the panel (60 mm), allowing quick snap-mounting and easy installation even under very cramped conditions.*
* Excluding E5CC-U and E5DC

Save Time!

The E5CC/E5CC-U/E5EC/E5AC/E5DC series is extremely easy to operate using the instrument’s five front keys.

E5AC-800 Features 6


With key features like simplicity in operation, Omron’s patented PID control, and 50ms sampling period, the E5CC/E5CC-U/E5EC/E5AC/E5DC sets a new standard in fast and precise temperature regulation.

Sampling period:50ms

Sampling Rate Sufficient to Handle Rapid Increases in Temperature

E5AC-800 Features 8

Independent heating/cooling PID

The heating and cooling PID can each be set individually. Also, autotuning (AT) will automatically set the PID constants.

E5AC-800 Features 9

Setting change protection

You can disable key operations to help prevent incorrect setting change.

E5AC-800 Features 10

Easy connections to a PLC with programless communications.

E5AC-800 Features 11


・ The amount of work to set up the system is greatly reduced.
・ PLC programming and memory are not required for communications.
・ Communications even with multiple Temperature Controllers are automatically executed by the Temperature Controllers.
・ Interface converters are not required, which reduces costs.
・ Number of connected Digital Temperature Controllers: 32 max. (Up to 16 for the FX Series)
E5AC-800 Features 12

More Convenient Operations

The parameters can be copied from the master Temperature Controller to slave Temperature Controllers.
Master Temperature Controller can share RUN/STOP operations and set points with slave Temperature Controllers.
Slope and offsets can be set for the set point.
Note: A Temperature Controller with version 1.1 or higher is required.
A Temperature Controller with version 2.1 or higher is required for the FX Series.