E3X-ZD11 Cảm biến sợi quang giá rẻ Omron

1.721 lượt xem

Ngày: 12/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Bộ khuếch đại cảm biến sợi quang

  • Ngõ ra NPN .
  • Nguồn cấp 12~24VDC . Nguồn sáng: Red LED (625nm)
  • Chức năng Power tuning: Điều khiển năng lượng và độ lợi phát xạ ánh sáng
  • Chọn chức năng phát hiện: Single edge hoặc double edge
  • Thời gian đáp ứng: Super-high-speed Mode *3: 80 µs; High-speed Mode: 250 µs;Standard Mode: 1 ms; High-resolution mode: 4 ms; Tough Mode: 16 ms
  • Chức năng timer: OFF-delay, ON-delay, one-shot, hoặc ON-delay + OFF-delay timer. (1 ms ~ 5 s )

1,610,000

Xin vui lòng liên hệ theo thông tin dưới dây

0816914999 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

E3X-ZD11

Cảm biến sợi quang giá rẻ Omron

The simplest E3X-ZD series Easy Operation for Anyone

Amplifier unit (main body)

ShapesConnectionsModel
NPN outputPNP output
3211_lu_1_1
Pre-wired modelsE3X-ZD11 2ME3X-ZD41 2M
3211_lu_1_2
Connector models*E3X-ZD6E3X-ZD8

* Suitable connectors: Please use the following simplified wiring connectors (each sold separately).

Simplified wiring connectors (each sold separately)

TypesShapesCable lengthQuantity of conductorsModel
Master connectors
3211_lu_2_1
2m3-wireE3X-CN11
Slave-connectors
3211_lu_2_2
1-wireE3X-CN12

Up to 16 units can be connected

E3X-ZD Lineup 4

Note:It can be mixed and used with other series (e.g., E3X-DA).

Precaution for making order for connectors of different models
(the main body and the connector are sold separately).

Please review the following combinations when making the order:

E3X-ZD Lineup 5

Accessories (each sold separately)

Metal fixing installation accessories

ShapesModelQuantity
3211_lu_5_1
E39-L1431

Rear pedestal

ShapesModelQuantity
3211_lu_6_1
PFP-M1

Amplifier unit

Item /ModelE3X-ZD[]
Light source
(emitted wavelength)
Red AIGALNN LED (620nm)
Power supply voltageDC12 to 24V±10% Ripple (P-P) 10% max.
Power consumption
(current consumption)
960mW max. (supply voltage 24V with current consumption 40mA max.)
Control outputOpen collector output (NPN or PNP)
Load current 50mA max. (Residual voltage 1.5V max.)
L-ON and D-ON pushbutton switch
Response timeAction•Reset: 200μs maximum for each
Sensitivity adjustmentTeaching (With or without workpiece/Automatic) or manual adjustment
Protection circuitPower reverse protect, output short-circuit protection, reverse output polarity protection
Digital displayLight power/Threshold 0 to 9999
Indicator (Orange)L-ON/D-ON indicator, Teach mode indicator, Operation mode indicator
Mutual interference
prevention
Light parallel (5 sets)*
Vibration
resistance(destruction)
10 to 55Hz, 1.5mm double amplitude for 2h each in X, Y, and Z directions
Shock
resistance(destruction)
500m/s2 for 3 times each in X, Y, and Z directions
Ambient illuminationIncandescent lamp: 10,000lx max., Sunlight: 20,000lx max.
Ambient temperatureOperation: Group of 1 to 3 Amplifiers: -25 to +55℃ (with no condensation)
Group of 4 to 11 Amplifiers: -25 to +50℃ (with no condensation)
Group of 12 to 16 Amplifiers: -25 to +45℃ (with no condensation)
Storage: -30 to +70℃(with no condensation)
Ambient humidityOperation and storage: 35 to 85%RH(with no condensation)
Insulation resistance20MΩ minimum (DC500V)
Dielectric strengthAC 1,000V 50/60Hz 1min
Degree of protectionIEC60529 IP50 (with the protective cover)
Weight (packaged state)Pre-wired models: Approx. 100g, Simplified wiring plug-in models: Approx. 40g
MaterialsCasePolybutylene phthalate (PBT)
coverPolycarbonate (PC)
AccessoriesUser Manual

* Please place the amplifiers as close as possible to each other for the mutual interference function.

Simplified wiring connectors

Item /ModelE3X-CN11E3X-CN12
Rated current2.5A
Rated voltage50V
Contact resistance20MΩ max. (at DC20mV and 100mA max.)
[Connected to the amplifier units and the connectors (wire resistance excluded)]
Plugging (destruction)50 times (connected to the amplifier units and the connectors)
MaterialsHousingPolybutylene phthalate (PBT)
ContactPhosphor bronze/Nickel-cadmium alloy plating (PC)
Weight (packaged state)Approx. 55gApprox. 25g
NHẬN XÉT SẢN PHẨM