E3RA-DP13 Omron Cảm biến quang trụ M18

49 lượt xem

Ngày: 14/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

Liên hệ

Chuyên mục: , .

Đảm bảo 100% hàng chính hãng

Dịch vụ khách hàng tốt nhất

0936.296.483 (hotline)

0936.296.483 (Hỗ trợ kỹ thuật)

E3RA-DP13 Omron Cảm biến quang trụ M18

Sensors (E3RA Plastic housing)

Red light

Sensor type Sensing
distance
Connection
method
Model
NPN output PNP output
Through-beam *1.

3130_lu_6_1
15 m pre-wired set E3RA-TN11 2M
Emitter E3RA-TN11-L 2M
Receiver E3RA-TN11-D 2M
set E3RA-TP11 2M
Emitter E3RA-TP11-L 2M
Receiver E3RA-TP11-D 2M
M12 connector set E3RA-TN21
Emitter E3RA-TN21-L
Receiver E3RA-TN21-D
set E3RA-TP21
Emitter E3RA-TP21-L
Receiver E3RA-TP21-D
Retro-reflective
with MSR
function *2.

3130_lu_6_2
0.1 to 3 m
with E39-R1S
pre-wired E3RA-RN11 2M E3RA-RP11 2M
M12 connector E3RA-RN21 E3RA-RP21
Diffuse-reflective

3130_lu_6_3
100 mm pre-wired E3RA-DN11 2M E3RA-DP11 2M
M12 connector E3RA-DN21 E3RA-DP21
300 mm pre-wired E3RA-DN12 2M E3RA-DP12 2M
M12 connector E3RA-DN22 E3RA-DP22
700 mm pre-wired E3RA-DN13 2M E3RA-DP13 2M
M12 connector E3RA-DN23 E3RA-DP23

*1. The set type includes the emitter and receiver.
*2. The Reflector is sold separately. Select the Reflector model most suited to the application.

Radial type (E3RA/E3RB)

Sensing method Through-
beam
Retro-
reflective
with MSR
function
Diffuse-reflective
Model NPN
output
Pre-wired E3R[]-TN11
2M
E3R[]-RN11
2M
E3R[]-DN11
2M
E3R[]-DN12
2M
E3R[]-DN13
2M
M12
Connector
E3R[]-TN21 E3R[]-RN21 E3R[]-DN21 E3R[]-DN22 E3R[]-DN23
PNP
output
Pre-wired E3R[]-TP11
2M
E3R[]-RP11
2M
E3R[]-DP11
2M
E3R[]-DP12
2M
E3R[]-DP13
2M
M12
Connector
E3R[]-TP21 E3R[]-RP21 E3R[]-DP21 E3R[]-DP22 E3R[]-DP23
Sensing distance 15 m 0.1 to 3 m
(with E39-R1S)
100 mm
(white paper:
300 × 300 mm)
300 mm
(white paper:
300 × 300 mm)
700 mm
(white paper:
300 × 300 mm)
Spot diameter
(reference value)
35 × 40 mm
Sensing
distance of
100 mm
40 × 45 mm
Sensing
distance of
300 mm
90 × 120 mm
Sensing
distance of
700 mm
Standard sensing object Opaque:
7 mm dia. min.
Opaque:
75 mm dia. min.
Differential travel 20% max.
Directional angle 2° min.
Light source (wavelength) Red LED (624 nm)
Power supply voltage 10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
Current consumption 40mA max.
(Emitter 25 mA
max. Receiver
15 mA max.)
25 mA max.
Control output NPN/PNP (open collector)
Load current: 100 mA max. (Residual voltage: 2 V max.), Load power supply voltage: 30
VDC max.
Operation mode Light-ON/Dark-ON selectable by wiring
Indicator Operation indicator (orange)
Stability indicator (green)
Power indicator (green): only Emitter of Through-beam
Protection circuits Power supply reverse polarity protection, Output short-circuit protection, and Output
reverse polarity protection
Response time 0.5 ms
Sensitivity adjustment One-turn adjuster
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max./Sunlight: 10,000 lx max.
Ambient temperature range Operating: -25 to 55°C/ Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35 to 85%/Storage: 35 to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z
directions
Shock resistance Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection IEC: IP67, DIN 40050-9: IP69K *
Weight
(packed
state/
only
sensor)
Pre-wired cable
(2M)
E3RA:
Approx. 110 g/
Approx. 50 g,
respectively,
E3RB:
Approx. 175 g/
Approx. 65 g,
respectively
E3RA: Approx. 60 g/Approx. 50 g,
E3RB: Approx. 95 g/Approx. 65 g
Connector E3RA:
Approx. 30 g/
Approx. 10 g,
respectively,
E3RB:
Approx. 85 g/
Approx. 20 g,
respectively
E3RA: Approx. 20 g/Approx. 10 g,
E3RB: Approx. 50 g/Approx. 20 g
Material Case E3RA: ABS, E3RB: Nickel-brass
Lens and Display PMMA
Adjuster POM
Nut E3RA: POM, E3RB: Nickel-brass
Accessories Instruction
sheet
M18 nuts (4
pcs)
Instruction sheet
M18 nuts (2 pcs)
E3FA, E3RA, E3FB, E3RB Specifications 8

* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.

NHẬN XÉT SẢN PHẨM