E2K-C25ME1 Cảm biến tiệm cận điện dung Omron

616 lượt xem

Ngày: 15/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

2,469,000

Chuyên mục: .
Xin vui lòng liên hệ theo thông tin dưới dây

0936.296.483 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

E2K-C25ME1

Cảm biến tiệm cận điện dung Omron

General-purpose Threaded Capacitive Sensor

• Product lineup with M12, M18, and M30 models.

• Fixed sensing distance requires no sensitivity adjustment.

Sensors

AppearanceSensing distanceOutput configurationModel
Operation mode
NONC
Unshielded

M124 mmDC 3-wire, NPNE2K-X4ME1 2ME2K-X4ME2 2M
DC 3-wire, PNPE2K-X4MF1 2ME2K-X4MF2 2M
AC 2-wireE2K-X4MY1 2ME2K-X4MY2 2M
M188 mmDC 3-wire, NPNE2K-X8ME1 2ME2K-X8ME2 2M
DC 3-wire, PNPE2K-X8MF1 2ME2K-X8MF2 2M
AC 2-wireE2K-X8MY1 2ME2K-X8MY2 2M
M3015 mmDC 3-wire, NPNE2K-X15ME1 2ME2K-X15ME2 2M
DC 3-wire, PNPE2K-X15MF1 2ME2K-X15MF2 2M
AC 2-wireE2K-X15MY1 2ME2K-X15MY2 2M
ModelE2K-X4ME[],
E2K-X4MF[],
E2K-X4MY[]
E2K-X8ME[],
E2K-X8MF[],
E2K-X8MY[]
E2K-X15ME[],
E2K-X15MF[],
E2K-X15MY[]
Sensing distance4mm ±10%8 mm ±10%15 mm ±10%
Set distance *10 to 2.8 mm0 to 5.6 mm0 to 10 mm
Differential travel4% to 20% of sensing distance
Detectable objectConductors and dielectrics
Standard sensing objectGrounded metal plate: 50 × 50 × 1 mm
Response frequencyE and F Models: 100 Hz, Y Models: 10 Hz
Power supply voltage *2
(operating voltage range)
E and F Models: 12 to 24 VDC (10 to 30 VDC)
Y Models: 100 to 220 VAC (90 to 250 VAC)
Current consumptionE and F Models: 15 mA max.
Leakage currentY Models: 2.2 mA max. (Refer to Datasheet.)
Control
output
Load currentE and F Models: 200 mA max.*2, Y Models: 10 to 200 mA
Residual
voltage
E and F Models: 2 V max. (Load current: 200 mA, Cable length: 2 m),
Y Models: Refer to Engineering Data on Data Sheet.
IndicatorsE and F Models: Detection indicator (red), Y Models: Operation indicator (red)
Operation mode
(with sensing object
approaching)
E1, F1, and Y1 Models: NO
E2, F2, and Y2 Models: NC
Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Protection circuitsE and F Models: Reverse polarity protection, Surge suppressor, load short-circuit
protection, output reverse polarity protection, Y Models: Surge suppressor
Ambient temperature
range
Operating/Storage: -25 to 70°C
(with no icing or condensation)
Operating/Storage: -10 to 55°C
(with no icing or condensation)
Ambient humidity rangeOperating/Storage: 35% to 95% (with no condensation)
Temperature influence±20% max. of sensing distance at 23°C in the operating temperature range
Voltage influenceE and F Models: ±2% max. of sensing distance at rated voltage at rated voltage ±20%
Y Models: ±2% max. of sensing distance at rated voltage at rated voltage ±10%
Insulation resistance50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strengthE and F Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Y Models: 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistanceDestruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z
directions
Shock resistanceDestruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protectionIP66 (IEC), in-house standards: oil-resistant
Connection methodPre-wired Models (Standard cable length: 2 m)
Weight (packed state)Approx. 65 gApprox. 145 gApprox. 205 g
MaterialsCaseHeat-resistant ABS
Sensing
surface
Clamping nutsPolyacetal
AccessoriesInstruction manual
*1. The above values are sensing distances for the standard sensing object. Refer to Engineering Data on Data Sheet for
other materials.
*2. E and F Models (DC switching models): A full-wave rectification power supply of 24 VDC ±20% (average value) can be
used.
NHẬN XÉT SẢN PHẨM