DRT2-ROS16 Mô đun DeviceNet Omron
76 lượt xem
Thông tin sản phẩm
0936.296.483 (Liên hệ mua hàng) Email: email@example.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)
0969.100.802 (Dịch vụ kỹ thuật) Email: firstname.lastname@example.org THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)
THÔNG TIN SẢN PHẨM
DeviceNet digital output unit, 16 x relay outputs, 3A, 240 VAC, 24 VDC, screw terminal block
Smart DeviceNet I/O
Compact DeviceNet I/O units with extensive diagnostic functions. Data regarding power supply status, I/O response times, operation counters and on-time are continuously recorded and checked against user-defined limits. Any deviation is reported to the control system, as indication to perform machine maintenance and prevent unplanned downtime. Smart DeviceNet I/Os are supported by PLC Function Blocks and HMI Smart Active Parts, allowing program-less visualisation and monitoring from the CJ1 PLCs and NS operator terminals.
- Compact size IP20 housing
- Expandable digital I/Os
- Built-in diagnostics and preventive maintenance functions
- Detachable I/O terminal blocks
- Analog I/O with data pre-processing and alarm functions
All Omron I/O units have built-in Smart Features that help to:
- Reduce engineering time
- Plan preventative maintainance
- Increase your productivity
Take a look at one of the features below for a demonstration.
Smart I/O can store the last date on which you performed maintenance. A better overview will help you plan maintenance more efficiently.
Smart I/O units all keep track of duration and number of operations, to help you plan machine maintenance. Timely warnings to inspect and adjust the machine will minimise unplanned downtime.
Smart I/O monitors its own supply voltage, and will warn you if the voltage is out of safe range – e.g. due to damaged cable or poor connection.
Smart I/O can measure delays between two I/O signals with millisecond accuracy. When your preset limit is exceeded, Smart I/O will warn you that wear or lack of lubrication has reduced machine performance.
Smart Analog I/O performs data pre-processing to help you reduce PLC programming. Scaling and alarms, and even totalising or rate-of-change calculations are handled inside the unit.
|Communication port(s)||DeviceNet Slave|
|Type of module||Digital I/O|
|I/O connection type||Screw|
|Number of digital inputs||0|
|Digital input type||None|
|Number of digital outputs||16|
|Digital output type||Relay NO|
|Permitted voltage at output||0-250 V|
|Output current||3 A|
|Short-circuit protected outputs|
|I/O system||I/O Expansion Link|
|Degree of protection (IP)||IP20|
|Product Weight (unpacked)||260 g|
|DCN1-1C||DeviceNet T-branch tap for 1 branch line, 3 connectors with screws, side cable entry|
|DCN1-1NC||DeviceNet T-Branch tap for 1 branch line, 3 parallel clamp connectors, top cable entry|
|DCN1-1P||DeviceNet power supply tap with 2 connectors, standard terminating resistor, and fuse|
|DCN1-3C||DeviceNet T-branch tap for 3 branch lines, 5 connectors with screws, side cable entry|
|DCN1-3NC||DeviceNet T-Branch tap for 3 branch lines, 5 parallel clamp connectors, top cable entry|
|DRS1-T||CompoNet/DeviceNet termination terminal block|
|XW4B-05C4-TF-D||DeviceNet multi-branching connector, parallel with screws, connector insertion and wiring in same direction.|
|XW4G-05C4-TF-D||DeviceNet connector, multi-branch parallel screwless, connector insertion and wiring in same direction.|
|XWT-ID08-1||CRT1/DRT2/GX-series I/O expansion unit, 8 x 24 VDC inputs, PNP (1 max per I/O terminal, specific models only)|
|XWT-ID16-1||CRT1/DRT2/GX-series I/O expansion unit, 16 x 24 VDC inputs, PNP (1 max per I/O terminal, specific models only)|
|XWT-OD08-1||CRT1/DRT2/GX-series I/O expansion unit, 8 x 24 VDC outputs, 0.5 A, PNP (1 max per I/O terminal, specific models only)|
|XWT-OD16-1||CRT1/DRT2/GX-series I/O expansion unit, 16 x 24 VDC outputs, 0.5 A, PNP (1 max per I/O terminal, specific models only)|