D4V-8104SZ-N Công tắc hành trình Omron

1,069 lượt xem

Ngày: 08/06/2019

Tình trạng : Còn Hàng

Thông tin sản phẩm

    

459,000

Chuyên mục: .
Xin vui lòng liên hệ theo thông tin dưới dây

0936.296.483 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

D4V-8104SZ-N

Công tắc hành trình Omron

Compact Vertical Models Sized for Asian Standards

Actuator typeModel
Roller lever
3231_lu_1_1
D4V-8104Z
Rod lever
3231_lu_1_2
D4V-8107Z
Adjustable roller lever
3231_lu_1_3
D4V-8108Z
Push plunger
3231_lu_1_4
D4V-8111Z
Roller plunger
3231_lu_1_5
D4V-8112Z
Crossroller plunger
3231_lu_1_6
D4V-8122Z
Coil spring
3231_lu_1_7
D4V-8166Z
Wire spring
3231_lu_1_8
D4V-8169Z

Note: Metallic roller levers and metallic variable roller levers can also be manufactured

Certified Standards

Certification bodyStandardFile No.
CCCGB14048.5Consult your OMRON representative for details.
UL *UL508, CSA C22.2 No. 14
TÜVIEC60947-5-1

* Certification equivalent to CSA C22.2 No. 14 has been obtained from UL.

Ratings

Rated voltage
(V)
Non-inductive load (A)Inductive load (A)
Resistive loadLamp loadInductive loadMotor load
NCNONCNONCNONCNO
125 VAC
250 VAC
5
5
1.5
1
0.7
0.5
3
3
2
1.5
1
0.8
12 VDC
24 VDC
5
5
3
3
4
4
3
3
125 VDC
250 VDC
0.4
0.4
0.2
0.2



Note: 1. The above current ratings are for steady-state current.
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
Inrush currentNC24 A max.
NO12 A max.

Ratings for Safety Standard Certification

CCC (GB14048.5), TÜV (EN60947-5-1)

Category and rating
AC-12: 250 VAC at 5 A, resistive load
DC-12: 125 VDC at 0.4 A, resistive load

UL (UL508, CSA C22.2 No. 14)

Ratings
5 A, 250 VAC
0.4 A, 125 VDC

Characteristics

Degree of protectionIP65
Durability
(See note 3.)
Mechanical10,000,000 operations min.
Electrical300,000 operations min. (5 A at 250 VAC, resistive load)
Operating speed5 mm to 0.5 m/s
Operating frequencyMechanical120 operations/min
Electrical30 operations/min
Insulation resistance100 MΩ min. (at 500 VDC)
Contact resistance25 mΩ max. (initial value)
Dielectric strengthBetween terminals of the
same polarity
1,000 VAC, 50/60 Hz for 1 min
Between currentcarrying
metal parts and ground
1,500 VAC, 50/60 Hz for 1 min
Rated insulation voltage (Ui)250 V
Pollution degree (application environment)3 (EN 60947-5-1)
Short-circuit protection device10-A fuse, gG or gI (IEC 269)
Conditional short-circuit current100 A (EN 60947-5-1)
Rated open thermal current (lth)5 A (EN 60947-5-1)
Electric shock protection classClass I
Rated frequency50/60 Hz
Vibration resistanceMalfunction10 to 55 Hz, 1.5-mm double amplitude (See note 4.)
Shock resistanceDestruction1,000 m/s2 (free position) min.
Malfunction300 m/s2 (operation limit position) min. (See note 4.)
Ambient operating temperature range-20°C to 60°C (with no icing)
Ambient operating humidity range90% max.
WeightApprox. 130 to 190 g
Note: 1. The above values are initial values.
2. The above characteristics may vary depending on the model. Contact your OMRON representative for further
details.
3. Durability values are calculated at an operating temperature of 5°C to 35°C, and an operating humidity of 40%
to 70%.
4. Except for the coil spring model and wire spring model

Operating Characteristics

ModelD4V-8104ZD4V-8107ZD4V-8108ZD4V-8111Z
Operating characteristics
Operating forceOF max.5.88 N5.88 N7.84 N9.8 N
Release forceRF min.0.49 N0.69 N0.49 N2.94 N
PretravelPT max.20°20°20°1.5 mm
OvertravelOT min.75°75°75°4 mm
Movement differentialMD max.10°10°10°1.2 mm
Total travelTT min.95°95°95°5.5 mm
Operating positionOP26±0.8 mm
ModelD4V-8112ZD4V-8122ZD4V-8166ZD4V-8169Z
Operating characteristics
Operating forceOF max.9.8 N9.8 N0.88 N0.88 N
Release forceRF min.2.94 N2.94 N
PretravelPT max.1.5 mm1.5 mm30 mm30 mm
OvertravelOT min.4 mm4 mm
Movement differentialMD max.1.2 mm1.2 mm
Total travelTT min.5.5 mm5.5 mm
Operating positionOP37±0.8 mm37±0.8 mm
Note: The operating characteristics of the D4V-8107 are measured with a lever length of 30 mm. The operating
characteristics of the D4V-8108 are measured with a lever length of R30.
NHẬN XÉT SẢN PHẨM