D4C-1502 Công tắc hành trình Omron

369 lượt xem

Ngày: 07/06/2019

Hết Hàng

Thông tin sản phẩm

1,029,000

Hết hàng

Xin vui lòng liên hệ theo thông tin dưới dây

0936.296.483 (Liên hệ mua hàng) Email: sales@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

0969.100.802 (Dịch vụ kỹ thuật) Email: services@minhquangelectric.com THỜI GIAN LÀM VIỆC: Thứ 2 - thứ 6 / 8:00 AM - 5:00 PM Thứ 7 / 9:00 AM - 11:00 AM (Email only)

D4C-1502

Công tắc hành trình Omron

Switches

Standard Switches with No Operation Indicator

ActuatorRatingsStandard loadMicroload
5 A at 250 VAC, 4 A at 30 VDC0.1 A at 125 VAC, 0.1 A at 30 VDC
CableVCTF oil-
resistant
cable *1
VCTF cable
*2
SJT(O)
cable
*3
VCTF oil-
resistant
cable *1
VCTF cable
*2
Cable
length (m)
Model
Pin plunger324_lu_1_13D4C-1201D4C-1401D4C-1601D4C-4201D4C-4401
5D4C-1301D4C-1501D4C-1701D4C-4301D4C-4501
Roller plunger324_lu_1_23D4C-1202D4C-1402D4C-1602D4C-4202D4C-4402
5D4C-1302D4C-1502D4C-1702D4C-4302D4C-4502
Crossroller
plunger
324_lu_1_33D4C-1203D4C-1403D4C-1603D4C-4203D4C-4403
5D4C-1303D4C-1503D4C-1703D4C-4303D4C-4503
Roller lever324_lu_1_43D4C-1220D4C-1420D4C-1620D4C-4220D4C-4420
5D4C-1320D4C-1520D4C-1720D4C-4320D4C-4520
Roller lever,
high-sensitivity
324_lu_1_53D4C-1224D4C-1424D4C-1624D4C-4224D4C-4424
5D4C-1324D4C-1524D4C-1724D4C-4324D4C-4524
Sealed pin
plunger
324_lu_1_63D4C-1231D4C-1431D4C-1631D4C-4231D4C-4431
5D4C-1331D4C-1531D4C-1731D4C-4331D4C-4531
Sealed roller
plunger
324_lu_1_73D4C-1232D4C-1432D4C-1632D4C-4232D4C-4432
5D4C-1332D4C-1532D4C-1732D4C-4332D4C-4532
Sealed
crossroller
plunger
324_lu_1_83D4C-1233D4C-1433D4C-1633D4C-4233D4C-4433
5D4C-1333D4C-1533D4C-1733D4C-4333D4C-4533
Plastic rod324_lu_1_93D4C-1250D4C-1450D4C-1650D4C-4250D4C-4450
5D4C-1350D4C-1550D4C-1750D4C-4350D4C-4550
Center roller
lever
324_lu_1_103D4C-1260D4C-1460D4C-1660D4C-4260D4C-4460
5D4C-1360D4C-1560D4C-4360D4C-4560
Note: 1. Models are available separately with resistance to viscous oils (oil drain holes are provided), but only with
Plunger Models. Add “-M” to the model number (example: D4C-1202 would be D4C-1202-M). Ask your nearest
OMRON representative for details.
2. Switches with variable roller levers are also available. Ask your nearest OMRON representative for details.
*1. Oil-resistant vinyl cabtire cables; approved by EN and IEC.
*2. Ordinary vinyl cabtire cables.
*3. Switches with SJT(O) Cables (cables approved by UL and CSA) are approved by UL and CSA.

Standard Switches with Operation Indicator (Red)

ActuatorRatings5 A at 125 VAC4 A at 30 VDC
CableVCTF oil-resistant
cable *1
VCTF cable
*2
VCTF oil-resistant
cable *1
VCTF cable
*2
Cable length (m)Model
Pin plunger324_lu_2_13D4C-2201D4C-2401D4C-3201D4C-3401
5D4C-2301D4C-2501D4C-3301D4C-3501
Roller plunger324_lu_2_23D4C-2202D4C-2402D4C-3202D4C-3402
5D4C-2302D4C-2502D4C-3302D4C-3502
Crossroller
plunger
324_lu_2_33D4C-2203D4C-2403D4C-3203D4C-3403
5D4C-2303D4C-2503D4C-3303D4C-3503
Roller lever324_lu_2_43D4C-2220D4C-2420D4C-3220D4C-3420
5D4C-2320D4C-2520D4C-3320D4C-3520
Roller lever,
high-sensitivity
324_lu_2_53D4C-2224D4C-2424D4C-3224D4C-3424
5D4C-2324D4C-2524D4C-3324D4C-3524
Sealed pin
plunger
324_lu_2_63D4C-2231D4C-2431D4C-3231D4C-3431
5D4C-2331D4C-2531D4C-3331D4C-3531
Sealed roller
plunger
324_lu_2_73D4C-2232D4C-2432D4C-3232D4C-3432
5D4C-2332D4C-2532D4C-3332D4C-3532
Sealed
crossroller
plunger
324_lu_2_83D4C-2233D4C-2433D4C-3233D4C-3433
5D4C-2333D4C-2533D4C-3333D4C-3533
Plastic rod324_lu_2_93D4C-2250D4C-2450D4C-3250D4C-3450
5D4C-2350D4C-2550D4C-3350D4C-3550
Center roller
lever
324_lu_2_103D4C-2260D4C-2460D4C-3260D4C-3460
5D4C-2360D4C-2560D4C-3360D4C-3560
Note: Ask your nearest OMRON representative for information on Switching with approved international standards.
*1. Oil-resistant vinyl cabtire cables; approved by EN and IEC.
*2. Ordinary vinyl cabtire cables.

Standard Switches with Operation Indicator

ActuatorRatings0.1 A at 125 VAC0.1 A at 30 VDC
CableVCTF oil-resistant cable *VCTF oil-resistant cable *
Cable length (m)Model
Pin plunger324_lu_3_13D4C-5201D4C-6201
5D4C-6301
Roller plunger324_lu_3_23D4C-5202D4C-6202
5D4C-5302D4C-6302
Crossroller plunger324_lu_3_33D4C-5203D4C-6203
5D4C-5303D4C-6303
Roller lever324_lu_3_43D4C-5220D4C-6220
5D4C-5320D4C-6320
Roller lever, high-sensitivity324_lu_3_53D4C-5224D4C-6224
5D4C-5324D4C-6324
Sealed pin plunger324_lu_3_63D4C-6231
5D4C-6331
Sealed roller plunger324_lu_3_73D4C-5232D4C-6232
5D4C-5332D4C-6332
Sealed crossroller plunger324_lu_3_83D4C-6233
5D4C-6333
Plastic rod324_lu_3_93D4C-5250D4C-6250
5D4C-5350D4C-6350

Note: Ask your nearest OMRON representative for information on Switching with approved international standards.
* Oil-resistant vinyl cabtire cables; approved by EN and IEC.

Pre-wired Models (Use VCTF Oil-resistant Cable)

ActuatorRatings1 A at 125 VAC1 A at 30 VDC
Operation
indicator
Without operation
indicator
With operation
indicator
Without operation
indicator
With operation
indicator
Pin plunger324_lu_4_1D4C-3001-DK1EJ[]
Roller plunger324_lu_4_2D4C-1002-AK1EJ[]D4C-2002-AK1EJ[]D4C-1002-DK1EJ[]D4C-3002-DK1EJ[]
Sealed plunger324_lu_4_3D4C-3031-DK1EJ[]
Sealed roller
plunger
324_lu_4_4D4C-1032-DK1EJ[]D4C-3032-DK1EJ[]
Roller lever
(high-sensitivity
model)
324_lu_4_5D4C-2024-AK1EJ[]D4C-1024-DK1EJ[]D4C-3024-DK1EJ[]
Note: 1. The [] contains the length of the cable.
For example: 30 cm → D4C-2002-AK1EJ03
2. M1J models are also available. Contact your OMRON sales representative for further information.
3. Of the above model numbers, some with special specifications are not registered.

Weather-resistant Models

ActuatorOperation indicatorWithout operating indicationWith operating indication
RatingsStandard loadMicroloadStandard load
5 A at 250 VAC
4 A at 30 VDC
0.1 A at 125 VAC
0.1 A at 30 VDC
5 A at 125 VAC4 A at 30 VDC
VCTF oil-resistant cable *
Cable length (m)Model
Roller lever324_lu_5_13D4C-1220-PD4C-4220-PD4C-2220-PD4C-3220-P
5D4C-1320-P
Roller lever
(high-sensitivity model)
324_lu_5_23D4C-1224-PD4C-4224-PD4C-2224-PD4C-3224-P
5D4C-1324-PD4C-4324-PD4C-2324-PD4C-3324-P
Adjustable roller lever324_lu_5_33D4C-1227-PD4C-4227-PD4C-2227-PD4C-3227-P
5D4C-1327-PD4C-4327-PD4C-2327-PD4C-3327-P
Adjustable rod lever324_lu_5_43D4C-1229-PD4C-4229-PD4C-3229-P
5D4C-1329-PD4C-2329-PD4C-3329-P
* Vinyl cabtire cable with excellent oil resistance.
Note: Silicon rubber is used to increase resistance to the environment. Silicon rubber, however, can generate silicon gas.
(This can occur at room temperature, but the amount of silicon gas generated increases at higher temperatures.)
Silicon gas will react as a result of arc energy and form silicon oxide (SiO2). If silicon oxide accumulates on the
contacts, contact interference can occur and can interfere with the device. Before using a Switch, test it under actual
application conditions (including the environment and operating frequency) to confirm that no problems will occur in
actual.

Applicable Cables

TypeFor ACFor DC
AppearanceNo. of conductorsCable lengthModelModel
Straight

324_lu_6_1
42 mXS2F-A421-D90-FXS2F-D421-D80-F
5 mXS2F-A421-G90-FXS2F-D421-G80-F

Mounting Plates (Order Separately)

The WL/WL-N model incorporated by equipment can be replaced with the D4C together with the Mounting Plate without changing the position of the dog or cam.

List of Replaceable Models

WL/WL-N model (Actuator)D4C model (Actuator)Plate
WLD/WL01D/WLD18-N
(Top plunger)
D4C-[][]01
(Plunger)
D4C-P001
WLD2/WL01D2/WLD28-N
(Top roller plunger)
D4C-[][]02
(Roller plunger)
D4C-P002
WLCA2/WL01CA2/WLCA2-N
(Roller lever)
D4C-[][]20
(Roller lever)
D4C-P020

Note: The WL01[] is for micro loads.

Example of Replacement

Note: The position of the dog remains unchanged.

D4C Lineup 16

Individual Parts

Head/Actuator

ActuatorHead (with actuator)Actuator
Pin plungerD4C-0001
Roller plungerD4C-0002
Crossroller plungerD4C-0003
Roller leverD4C-0020WL-1A100
Roller lever (weather-resistant model)WL-1A100P1
Roller lever (high-sensitivity model)D4C-0024WL-1A100
Variable roller leverD4C-0027
Variable rod leverD4C-0029HL-1HPA500
Sealed pin plungerD4C-0031
Sealed roller plungerD4C-0032
Sealed crossroller plungerD4C-0033
Plastic rodD4C-0050
Center roller leverD4C-0060
Note: 1. The model numbers for heads are of the form D4C-00[][], with the numbers in the squares indicating the type of
actuator.
2. Actuators for plunger models, plastic rod models, and center roller lever models cannot be ordered individually.
They must be ordered together with the head.
NHẬN XÉT SẢN PHẨM